8TQ...SPbF Series
Bulletin PD-21041 rev. B 06/06
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
8TQ080SPbF
80
8TQ100SPbF
100
Absolute Maximum Ratings
Parameters
8TQ
IF(AV) Max. Average Forward Current
* See Fig. 5
IFSM Max. Peak One Cycle Non-Repetitive
Surge Current * See Fig. 7
EAS Non-Repetitive Avalanche Energy
IAR Repetitive Avalanche Current
8
850
230
7.50
0.50
Units
Conditions
A 50% duty cycle @ TC = 157° C, rectangular wave form
A
5μs Sine or 3μs Rect. pulse
Following any rated
load condition and
10ms Sine or 6ms Rect. pulse with rated VRRM applied
mJ TJ = 25 °C, IAS= 0.50 Amps, L = 60 mH
A Current decaying linearly to zero in 1 μsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop
* See Fig. 1
(1)
IRM Max. Reverse Leakage Current (1)
* See Fig. 2
CT Max. Junction Capacitance
LS Typical Series Inductance
dv/dt Max. Voltage Rate of Change
(Rated VR)
8TQ
0.72
0.88
0.58
0.69
0.55
7
500
8
10000
Units
Conditions
V @ 8A
V @ 16A
TJ = 25 °C
V @ 8A
V @ 16A
TJ = 125 °C
mA TJ = 25 °C
mA TJ = 125 °C
VR = rated VR
pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25 °C
nH Measured lead to lead 5mm from package body
V/ μs
(1) Pulse Width < 300μs, Duty Cycle < 2%
Thermal-Mechanical Specifications
Parameters
8TQ Units
Conditions
TJ Max. Junction Temperature Range
Tstg Max. Storage Temperature Range
RthJC Max. Thermal Resistance Junction
to Case
-55 to 175 °C
-55 to 175 °C
2.0 °C/W DC operation * See Fig. 4
RthCS Typical Thermal Resistance, Case to
Heatsink
0.50
°C/W Mounting surface , smooth and greased
wt Approximate Weight
2 (0.07) g (oz.)
T Mounting Torque
Min.
Max.
6 (5) Kg-cm
12 (10) (Ibf-in)
Marking Device
8TQ...S
Case style D2Pak
2 www.irf.com
