HYBRID - HIGH RELIABILITY
28V Input, Dual Output
The ATR28XXD Series of DC-DC converters feature
high power density and an extended temperature range
for use in military and industrial applications. Designed
to MIL-STD-704D input requirements, these devices
have nominal 28VDC inputs with ±12V and ±15V dual
outputs to satisfy a wide range of requirements. The
circuit design incorporates a pulse width modulated
single forward topology operating in the feed-forward
mode at a nominal switching frequency of 550KHz.
Input to output isolation is achieved through the use of
transformers in the forward and feedback circuits.
The advanced feedback design provides fast loop
response for superior line and load transient characteristics
and offers greater reliability and radiation tolerance
than devices incorporating optical feedback circuits.
Three standard temperature grades are offered with
screening options. Refer to Part Number section. They
can be provided in a standard plug-in package for PC
mounting or in a flanged package for more severe
Manufactured in a facility fully qualified to MIL-PRF-
38534, these converters are fabricated utilizing DLA
and Land Maritime qualified processes. For available
screening options, refer to device screening table in
the data sheet. Variations in electrical, mechanical
and screening can be accommodated.
n 16V to 40VDC Input Range (28VDC Nominal)
n ±12V and ±15V Outputs Available
n Indefinite Short Circuit and Overload Protection
n 35W/in3 Power Density
n 30W Output Power
n Fast Loop Response for Superior Transient
n Operating Temperature Range from
-55°C to +125°C
n Popular Industry Standard Pin-Out
n Resistance Seam Welded Case for Superior
Long Term Hermeticity
n Ceramic Feed-thru Pins
n External Synchronization
n High Efficiency
n Shutdown from External Signal
n Military Screening
n Standard Microcircuit Drawings Available
Extensive computer simulation using complex modeling
enables rapid design modification to be provided.
Contact IR San Jose with specific requirements.