DF04S Datasheet | International Rectifier

Features - Glass passivated chips - Leads on standard 0.1" grid - Suitable for automatic insertion - High surge current capability - Fully characterised data - Wide temperature range - Surface mount option - Lead free terminals solderable as per MIL-STD-750 Method 2026 - High temperature soldering guaranteed 260°C/8-10 secs - Polarity symbols marked on the case - UL E160375 approved ~ ~ + IO(av) = 1.0 A IO(av) - VRRM range 50 to 1000V Description The DF Series of Single Phase Rectifier Bridges consists of four silicon junctions encapsulated in a 4 pin D.I.L. package. These devices are intended for general use in industrial and consumer equipment. Electrical Specification IO Maximum DC output current IFSM Maximum peak one cycle, non-repetitive surge current I2t Maximum I2t capability for fusing I2√t VFM IRM f VRRM Maximum I2√t capability for fusing Maximum peak forward voltage per diode Typical peak reverse leakage per diode Operating frequency range Maximum repetitive peak reverse voltage range DF... 1.0 0.8 30 31 4.5 4.1 6.4 5.8 64 Units A2s A2s A2s A2s A2√s Conditions Tamb = 40o C, Resistive or inductive load Tamb = 40o C, Capacitive load t = 10ms, 20ms Following any rated t = 8.3ms, 16.7ms load condition and with t = 10ms t = 8.3ms t = 10ms t = 8.3ms rated VRRM reapplied Initial TJ = TJ max 100% VRRM reapplied Initial TJ = TJ max no voltage reapplied t = 0.1 to 10ms, no voltage reapplied 1.0 V IFM = 1.0A, TJ = 25o C 5 µA TJ = 25o C, 100% VRRM 100 µA TJ = 150o C, 100% VRRM 50 to 1000 Hz 50 to 1000...