900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




International Rectifier Electronic Components Datasheet

EMP25P12B Datasheet

NPT IGBTs 25A

No Preview Available !

Bulletin I27149 08/07
www.DataSheet4U.com
EMP25P12B
PIM+
EMP Features:
Power Module:
NPT IGBTs 25A, 1200V
10us Short Circuit capability
Square RBSOA
Low Vce(on) (2.28Vtyp @ 25A, 25°C)
Positive Vce(on) temperature coefficient
Gen III HexFred Technology
Low diode VF (1.76Vtyp @ 25A, 25°C)
Soft reverse recovery
4msensing resistors on all phase outputs and
DCbus minus rail
Thermal coefficient < 50ppm/°C
Description
The EMP25P12B is a Power Integrated Module for Motor
Driver applications with embedded sensing resistors on all
three-phase output currents.
Each sensing resistor’s head is directly bonded to an
external pin to reduce parasitic effects and achieve high
accuracy on feedback voltages.
Since their thermal coefficient is very low, no value
compensation is required across the complete operating
temperature range.
The device comes in the EMPTM package, fully compatible in
length, width and height with EconoPack 2 outline.
Package:
EMP – Inverter (EconoPack 2 outline compatible)
Power Module schematic:
Three phase inverter with current sensing
resistors on all output phases and thermistor
Power module frame pins mapping
www.irf.com
1


International Rectifier Electronic Components Datasheet

EMP25P12B Datasheet

NPT IGBTs 25A

No Preview Available !

EMP25P12B I27149 08/07
www.DataSheet4U.com
Pins Mapping
Symbol
DC IN+
DC IN-
DC +
DC -
Th +
Th -
Sh +
Sh -
G1/2/3
E1/2/3
R1/2/3 +
R1/2/3 -
G4/5/6
E4/5/6
OUT1/2/3
Lead Description
DC Bus plus power input pin
DC Bus minus power input pin
DC Bus plus signal connection (Kelvin point)
DC Bus minus signal connection (Kelvin point)
Thermal sensor positive input
Thermal sensor negative input
DC Bus minus series shunt positive input (Kelvin point)
DC Bus minus series shunt negative input (Kelvin point)
Gate connections for high side IGBTs
Emitter connections for high side IGBTs (Kelvin points)
Output current sensing resistor positive input (IGBTs emitters 1/2/3 side, Kelvin points)
Output current sensing resistor negative input (Motor side, Kelvin points)
Gate connections for low side IGBTs
Emitter connections for low side IGBTs (Kelvin points)
Three phase power output pins
Absolute Maximum Ratings (TC=25ºC)
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur.
All voltage parameters are absolute voltages referenced to VDC-, all currents are defined positive into any lead.
Thermal Resistance and Power Dissipation ratings are measured at still air conditions.
Inverter
Power
Module
Symbol
VDC
VCES
IC @ 100C
IC @ 25C
ICM
IF @ 100C
IF @ 25C
IFM
VGE
PD @ 25°C
PD @ 100°C
MT
TJ
TSTG
Vc-iso
Parameter Definition
DC Bus Voltage
Collector Emitter Voltage
IGBTs continuous collector current (TC = 100 ºC, fig. 1)
IGBTs continuous collector current (TC = 25 ºC,fig 1)
Pulsed Collector Current (Fig. 3, Fig. CT.5)
Diode Continuous Forward Current (TC = 100 ºC)
Diode Continuous Forward Current (TC = 25 ºC)
Diode Maximum Forward Current
Gate to Emitter Voltage
Power Dissipation (One transistor)
Power Dissipation (One transistor, TC = 100 ºC)
Mounting Torque
Operating Junction Temperature
Storage Temperature Range
Isolation Voltage to Base Copper Plate
Min.
0
0
-20
-40
-40
-2500
Max.
1000
1200
25
50
100
25
50
100
+20
192
77
3.5
+150
+125
+2500
Units
V
A
V
W
Nm
ºC
V
www.irf.com
2


Part Number EMP25P12B
Description NPT IGBTs 25A
Maker International Rectifier
PDF Download

EMP25P12B Datasheet PDF






Similar Datasheet

1 EMP25P12B NPT IGBTs 25A
International Rectifier





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy