Datasheet4U Logo Datasheet4U.com

IR1150SPBF - UPFC ONE CYCLE CONTROL PFC IC

This page provides the datasheet information for the IR1150SPBF, a member of the IR1150IS UPFC ONE CYCLE CONTROL PFC IC family.

Datasheet Summary

Description

The µPFC IR1150 is a power factor correction (PFC) control IC designed to operate in continuous conduction mode (CCM) over a wide range input line voltages.

The IR1150 is based on IR's proprietary "One Cycle Control" (OCC) technique providing a cost effective solution for PFC.

Features

  • PFC with IR proprietary “One Cycle Control” Continuous conduction mode (CCM) boost type PFC No line voltage sense required Programmable switching frequency (50kHz-200kHz) Programmable output overvoltage protection Brownout and output undervoltage protection Cycle-by-cycle peak current limit Soft start User initiated micropower “Sleep Mode”.

📥 Download Datasheet

Datasheet preview – IR1150SPBF

📁 Similar Datasheet

  • IR11-21C - Technical Data Sheet 1206 Package Chip Infrared LED With Inner Lens (Everlight Electronics)
  • IR1161LPBF - SmartRectifier Controller (Infineon)
  • IR11688S - DUAL SYNCHRONOUS RECTIFICATION CONTROLLER (Infineon)
  • IR11BD - Single Gas Sensor (SGX)
  • IR11BR - Single Gas Sensor (SGX)
  • IR11EJ - Single Gas Sensor (SGX)
  • IR11EM - Single Gas Sensor (SGX)
  • IR11GJ - Single Gas Sensor (SGX)
  • IR11GM - Single Gas Sensor (SGX)
  • IR1011 - Photovoltaic Infrared Sensor (Asahi Kasei Microsystems)
Other Datasheets by International Rectifier
  • IR1150S - UPFC ONE CYCLE CONTROL PFC IC
  • IR1150 - uPFC ONE CYCLE CONTROL PFC IC
  • IR1150IS - UPFC ONE CYCLE CONTROL PFC IC
  • IR1150ISPBF - UPFC ONE CYCLE CONTROL PFC IC
  • IR1150LS - uPFC One Cycle Control PFC IC
  • IR1152S - uPFC ONE CYCLE CONTROL PFC IC
  • IR1153S - uPFC ONE CYCLE CONTROL IC
  • IR1155S - uPFC ONE CYCLE CONTROL PFC IC

Full PDF Text Transcription

Click to expand full text
Data Sheet No. PD60230 revAa µPFC ONE CYCLE CONTROL PFC IC Features • • • • • • • • • PFC with IR proprietary “One Cycle Control” Continuous conduction mode (CCM) boost type PFC No line voltage sense required Programmable switching frequency (50kHz-200kHz) Programmable output overvoltage protection Brownout and output undervoltage protection Cycle-by-cycle peak current limit Soft start User initiated micropower “Sleep Mode” • • • • • • • • • • Open loop protection Maximum duty cycle limit of 98% User programmable fixed frequency operation Min. off time of 150-350ns over freq range VCC under voltage lockout Internally clamped 13V gate drive Fast 1.
Published: |