Data Sheet PD60254A
SmartRectifierTM CONTROL IC
Secondary side high speed SR controller
DCM, CrCM and CCM flyback topologies
200V proprietary IC technology
Max 500KHz switching frequency
Anti-bounce logic and UVLO protection
7A peak turn off drive current
Micropower start-up & ultra low quiescent current
10.7/14.5V gate drive clamp
50ns turn-off propagation delay
Vcc range from 11.3V to 20V
Direct sensing of MOSFET drain voltage
Minimal component count
Compatible with 1W Standby, Energy Star, CECP, etc.
IR1167S is a smart secondary side driver IC designed to drive N-Channel power MOSFETs
used as synchronous rectifiers in isolated Flyback converters.
The IC can control one or more paralleled N-MOSFETs to emulate the behavior of Schottky
diode rectifiers. The drain to source voltage is sensed differentially to determine the polarity
of the current and turn the power switch on and off in proximity of the zero current transi-
Ruggedness and noise immunity are accomplished using an advanced blanking scheme
and double-pulse suppression which allow reliable operation in continuous, discontinuous
and critical current mode operation and both fixed and variable frequency modes.
IR1167 Application Diagram
*Please note that this data sheet contains advanced information that could change before the product is released to production.