IR2233S Datasheet | International Rectifier

Data Sheet No. PD60107 rev Y IR2133/IR2135(J&S) & (Pb F) IR2233/IR2235(J&S) & (Pb F) 3-PHASE BRIDGE DRIVER Features - Floating channel designed for bootstrap operation Fully operational to +600V or+1200V Tolerant to negative transient voltage d V/dt immune - Gate drive supply range from 10V/12V to 20V DC and up to 25V for transient - Undervoltage lockout for all channels - Over-current shut down turns off all six drivers - Independent 3 half-bridge drivers - Matched propagation delay for all channels - 2.5V logic patible - Outputs out of phase with inputs - All parts are also available LEAD-FREE Product Summary VOFFSET IO+/- VOUT ton/off (typ.) Deadtime (typ.) 600V or 1200V max. 200 m A / 420 m A 10 - 20V or 12 - 20V 750/700 ns 250 ns Packages Description The IR2133IR2135/IR2233IR2355 (J&S) are high voltage, high speed power MOSFET and IGBT driver with three independent high side and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are patible with CMOS or LSTTL outputs, down to 28-Lead SOIC 28-Lead PDIP 2.5V logic. An independent operational amplifier provides an analog feedback of bridge current via an external current sense resistor. A 44-Lead PLCC w/o 12 leads current trip function which terminates all six outputs can also be de- rived from this resistor. A shutdown function is available to terminate all six outputs. An open drain FAULT signal is provided to indicate that an over-current or undervoltage shutdown has occurred. Fault conditions are cleared with the FLT-CLR lead. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 volts or 1200 volts. Typical Connection up to 600V or...