Datasheet4U Logo Datasheet4U.com

IR2308PBF - HALF-BRIDGE DRIVER

Download the IR2308PBF datasheet PDF. This datasheet also covers the IR2308 variant, as both devices belong to the same half-bridge driver family and are provided as variant models within a single manufacturer datasheet.

Description

The IR2308(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels.

Features

  • Packages.
  • Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune.
  • Gate drive supply range from 10 to 20V.
  • Undervoltage lockout for both channels.
  • 3.3V, 5V and 15V input logic compatible.
  • Cross-conduction prevention logic.
  • Matched propagation delay for both channels.
  • Outputs in phase with inputs.
  • Logic and power ground +/- 5V offset.
  • Inte.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (IR2308_InternationalRectifier.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
IR236 Infrared Fever Sensing System User Manual Guide Infrared
IR2383C 5mm Infrared LED Everlight Electronics
IR23BD Infrared Single Gas Sensor SGX
IR204 3mm Infrared LED Everlight Electronics
IR204-A 3mm Infrared LED Everlight Electronics

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IR2308 HALF-BRIDGE DRIVER
IR2308S HALF-BRIDGE DRIVER
IR2301 HIGH AND LOW SIDE DRIVER
IR2301PBF HIGH AND LOW SIDE DRIVER
IR2301S HIGH AND LOW SIDE DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet No. PD60209 revC IR2308(S) & (PbF) HALF-BRIDGE DRIVER Features Packages • Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune • Gate drive supply range from 10 to 20V • Undervoltage lockout for both channels • 3.3V, 5V and 15V input logic compatible • Cross-conduction prevention logic • Matched propagation delay for both channels • Outputs in phase with inputs • Logic and power ground +/- 5V offset.
Published: |