Datasheet4U Logo Datasheet4U.com

IR3575 - 60A Exposed Top Integrated PowIRstage

Description

The IR3575 exposed-top integrated PowIRstage® is a synchronous buck gate driver co-packed with a control MOSFET and a synchronous MOSFET with integrated Schottky diode.

It is optimized internally for PCB layout, heat transfer and driver/MOSFET timing.

Features

  • Peak efficiency up to 95% at 1.2V.
  • Integrated driver, control MOSFET, synchronous MOSFET and Schottky diode.
  • Input voltage (VIN) operating range up to 15V.
  • Output voltage range from 0.25V to Vcc-2.5V, or to 5.5V if internal current sense amplifier is not used.
  • Output current capability of 60A DC.
  • Operation up to 1.0MHz.
  • Integrated current sense amplifier.
  • VCC under voltage lockout.
  • Thermal flag.
  • Body-Braking® load transient support.
  • Diode-e.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IR350 Receiver Pre-amp Module ETC
IR35215 dual output digital multi-phase controller Infineon
IR300N-D0 Infrared Emitter CT Micro
IR304C-AXXXX Infrared LED Lamp Xinqiao Optoelectronic
IR311 REFLECTIVE NON FOCUSING SENSOR Fairchild Semiconductor

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IR3500 VR11.0 & AMD PVID CONTROLLER
IR3502 CONTROLLER
IR3505 PHASE
IR3506 DDR & VTT PHASE
IR3507 PHASE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
60A Exposed Top Integrated PowIRstage® IR3575 FEATURES  Peak efficiency up to 95% at 1.2V  Integrated driver, control MOSFET, synchronous MOSFET and Schottky diode  Input voltage (VIN) operating range up to 15V  Output voltage range from 0.25V to Vcc-2.5V, or to 5.5V if internal current sense amplifier is not used  Output current capability of 60A DC  Operation up to 1.0MHz  Integrated current sense amplifier  VCC under voltage lockout  Thermal flag  Body-Braking® load transient support  Diode-emulation high efficiency mode  Compatible with 3.3V PWM logic and VCC tolerant  Compliant with Intel DrMOS V4.0  PCB footprint compatible with IR3550 and IR3551  Enhanced top side cooling through exposed pad  Small 6mm x 6mm x 0.
Published: |