900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




International Rectifier Electronic Components Datasheet

IRKN42 Datasheet

(IRKN41 / IRKN56) THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR

No Preview Available !

Bulletin I27131 rev. G 10/02
www.DataSheet4U.com
THYRISTOR/ DIODE and
THYRISTOR/ THYRISTOR
Features
High Voltage
Industrial Standard Package
Thick Al metal die and double stick bonding
Thick copper baseplate
UL E78996 approved
3500VRMS isolating voltage
IRK.41, .56 SERIES
ADD-A-pakTM GEN V Power Modules
Benefits
Up to 1600V
Full compatible TO-240AA
High Surge capability
Easy Mounting on heatsink
Al203 DBC insulator
Heatsink grounded
45 A
60 A
Mechanical Description
The Generation V of Add-A-pak module combine the
excellent thermal performance obtained by the usage of
Direct Bonded Copper substrate with superior
mechanical ruggedness, thanks to the insertion of a
solid Copper baseplate at the bottom side of the device.
The Cu baseplate allow an easier mounting on the
majority of heatsink with increased tolerance of surface
roughness and improve thermal spread.
The Generation V of AAP module is manufactured
without hard mold, eliminating in this way any possible
direct stress on the leads.
The electrical terminals are secured against axial pull-out:
they are fixed to the module housing via a click-stop
feature already tested and proved as reliable on other IR
modules.
Electrical Description
These modules are intended for general purpose high
voltage applications such as high voltage regulated power
supplies, lighting circuits, temperature and motor speed
control circuits, UPS and battery charger.
Major Ratings and Characteristics
Parameters
IT(AV) or IF(AV)
@ 85°C
IRK.41
45
IRK.56
60
IO(RMS) (*)
ITSM @ 50Hz
IFSM @ 60Hz
I2t @ 50Hz
100
850
890
3.61
135
1310
1370
8.50
@ 60Hz
I2t
VRRM range
TSTG
TJ
(*) As AC switch.
3.30
36.1
7.82
85.0
400 to 1600
- 40 to 125
- 40 to125
Units
A
A
A
A
KA2s
KA2s
KA2s
V
oC
oC
www.irf.com
1


International Rectifier Electronic Components Datasheet

IRKN42 Datasheet

(IRKN41 / IRKN56) THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR

No Preview Available !

www.DataSheet4U.com
IRK.41, .56 Series
Bulletin I27131 rev. G 10/02
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Type number
Voltage
Code
-
VRRM , maximum
repetitive
peak reverse voltage
V
VRSM , maximum VDRM , max. repetitive
non-repetitive peak off-state voltage,
peak reverse voltage gate open circuit
VV
04 400 500 400
06 600 700 600
08 800 900 800
IRK.41/ .56 10 1000
1100
1000
12 1200
1300
1200
14 1400
1500
1400
16 1600
1700
1600
IRRM
IDRM
125°C
mA
15
On-state Conduction
Parameters
IRK.41
IRK.56
Units Conditions
IT(AV) Max. average on-state
current (Thyristors)
IF(AV) Maximum average
forward current (Diodes)
IO(RMS)
Max. continuous RMS
on-state current.
As AC switch
ITSM Max. peak, one cycle
or non-repetitive on-state
IFSM or forward current
I2t Max. I2t for fusing
I2t Max. I2t for fusing (1)
45
45
100
850
890
715
750
940
985
3.61
3.30
2.56
2.33
4.42
4.03
36.1
60
60
135
1310
1370
1100
1150
1450
1520
8.56
7.82
6.05
5.53
10.05
9.60
85.6
180o conduction, half sine wave,
TC = 85oC
A
KA2s
KA2s
or
I(RMS)
I(RMS)
t=10ms No voltage
t=8.3ms reapplied
t=10ms 100% VRRM
t=8.3ms reapplied
Sinusoidal
half wave,
Initial TJ = TJ max.
t=10ms TJ = 25oC,
t=8.3ms no voltage reapplied
t=10ms No voltage
t=8.3ms reapplied
t=10ms 100% VRRM
t=8.3ms reapplied
Initial TJ = TJ max.
t=10ms TJ = 25oC,
t=8.3ms no voltage reapplied
t=0.1 to 10ms, no voltage reapplied
VT(TO) Max. value of threshold
voltage (2)
rt Max. value of on-state
slope resistance (2)
VTM Max. peak on-state or
VFM forward voltage
di/dt Max. non-repetitive rate
of rise of turned on
current
IH Max. holding current
IL Max. latching current
0.88
0.91
5.90
5.74
1.81
0.85
0.88
3.53
3.41
1.54
150
200
400
V
m
V
A/µs
mA
Low level (3)
High level (4)
TJ = TJ max
Low level (3)
High level (4)
TJ = TJ max
ITM = π x IT(AV)
IFM = π x IF(AV)
TJ = 25°C
TJ = 25oC, from 0.67 VDRM,
ITM =π x ,IT(AV) Ig = 500mA,
tr < 0.5 µs, tp > 6 µs
TJ = 25oC, anode supply = 6V,
resistive load, gate open circuit
TJ = 25oC, anode supply = 6V,resistive load
(1) I2t for time tx = I2t x tx
(4) I > π x IAV
(2) Average power = VT(TO) x IT(AV) + rt x (IT(RMS))2
(3) 16.7% x π x IAV < I < π x IAV
2 www.irf.com


Part Number IRKN42
Description (IRKN41 / IRKN56) THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR
Maker International Rectifier
PDF Download

IRKN42 Datasheet PDF






Similar Datasheet

1 IRKN41 (IRKN41 / IRKN56) THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR
International Rectifier
2 IRKN42 (IRKN41 / IRKN56) THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR
International Rectifier





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy