IRMCK343
Overview
IRMCK343 is a high performance OTP based motion control IC designed primarily for appliance applications. IRMCK343 is designed to achieve low cost and high performance control solutions for advanced inverterized appliance moto.
- MCE (Motion Control Engine) - Hardware based computation engine for high efficiency sinusoidal sensorless control of permanent magnet AC motor Integrated Power Factor Correction control Supports both interior and surface permanent magnet motors Built-in hardware peripheral for single shunt current feedback reconstruction No external current or voltage sensing operational amplifier required Three/two-phase Space Vector PWM Three-channel analog output (PWM) Embedded 8-bit high speed microcontroller (8051) for flexible I/O and man-machine control JTAG programming port for emulation/debugger Serial communication interface (UART) I2C/SPI serial interface Watchdog timer with independent analog clock Three general purpose timers/counters Two special timers: periodic timer, capture timer Internal ‘One-Time Programmable’ (OTP) memory and internal RAM for final production usage Pin compatible with IRMCK343, RAM version 1.8V/3.3V CMOS TM Product Summary Maximum crystal frequency Maximum internal clock (SYSCLK) frequency Maximum 8051 clock frequency Sensorless control computation time MCE TM 60 MHz 128 MHz 33 MHz 11 μsec typ 16 bit signed 56K bytes 8K bytes 2 μsec 16 bits/ SYSCLK 5 12 bits 2 μsec 2 SYSCLK 8 bits 57.6K bps 23 QFP64 -40°C ~ 85°C computation data range
