Datasheet4U Logo Datasheet4U.com

IRPT1058 Datasheet Integrated Power Stage

Manufacturer: International Rectifier (now Infineon)

Overview: PD 6.115 PRELIMINARY IRPT1058 ΤΜ Integrated Power Stage for 0.75 hp Motor Drives · 0.75 hp (0.56 kW) power output Industrial rating at 150% overload for 1 minute · 180 - 240V AC single-phase input, 50/60Hz · Available as complete system or as sub-system assemblies www.DataSheet4U.com Power Module · Single-phase rectifier bridge · 3-phase short circuit rated, ultrafast IGBT inverter · Low inductance (current sense) shunts in positive and negative DC rail · NTC temperature sensor · Pin-to-base plate isolation 2500V rms · Easy-to-mount two-screw package · Case temperature range -25°C to 125°C operational Driver-Plus Board · DC bus capacitor filter with NTC inrush current limiter · IR2132 monolithic 3-phase HVIC driver · On-board +15V and +5V power supply · MOV surge suppression at input · DC bus voltage and current feedback · Protection for short-circuit, earth/ground fault and overtemperature · Terminal blocks for single-phase input and 3-phase output connections 180 - 240V single-phase input IRPT1058C Figure 1.

General Description

The IRPT1058C provides the complete conversion function for a 0.75 hp (0.56 kW) variable frequency, variable voltage, AC motor controller.

The combines a power module IRPT1058A with a Driver-Plus Board IRPT1058D.

Figure 1 shows the block diagram of the within an AC motor control system.

Key Features

  • grease on the heat sink, covering the entire ar.