Datasheet4U Logo Datasheet4U.com

IRUH3301A2AP - Radiation Hardended Ultra Low Dropout Adjustable Positive Linear Regulator

This page provides the datasheet information for the IRUH3301A2AP, a member of the IRUH3301A2AK Radiation Hardended Ultra Low Dropout Adjustable Positive Linear Regulator family.

Datasheet Summary

Description

The IRUH3301A2 is a space qualified, ultra low dropout linear regulator designed specifically for applications requiring high reliability, low noise and radiation hardness.

The output voltage can be adjusted to a low 0.8V with a droput voltage of 400mV at the full rated current of 3.0 Amps.

Features

  • n Silicon On Insulator (SOI) CMOS Regulator IC, CMOS Latch-Up Immune, Inherently Rad Hard n Total Dose Capability up to 300Krads(Si) (Condition A); Tested to 500Krad (Si) n ELDRS up to 100Krad(Si) (Condition D) n SEU Immune up to LET = 80 MeV.
  • cm2/mg n Space Level Screened n Fast Transient Response n Timed Latch-Off Over-Current Protection n Internal Thermal Protection n Adjustable Output as low as 0.8V n On/Off Control via Shutdown Pin, Power Sequencing Easily Implemented n Isolated Hermetic.

📥 Download Datasheet

Datasheet preview – IRUH3301A2AP

Datasheet Details

Part number IRUH3301A2AP
Manufacturer International Rectifier
File Size 190.83 KB
Description Radiation Hardended Ultra Low Dropout Adjustable Positive Linear Regulator
Datasheet download datasheet IRUH3301A2AP Datasheet
Additional preview pages of the IRUH3301A2AP datasheet.
Other Datasheets by International Rectifier

Full PDF Text Transcription

Click to expand full text
PD-97534D Radiation Hardened Ultra Low Dropout Adjustable Positive Linear Regulator (5962F1023502K) IRUH3301A2AK IRUH3301A2AP +5.0VIN to VADJ @3.0A Product Summary Part Number Dropout IO VIN VOUT IRUH3301A2AK IRUH3301A2AP 0.4V 3.0A 5.0V ADJ 8-LEAD FLAT PACK Description The IRUH3301A2 is a space qualified, ultra low dropout linear regulator designed specifically for applications requiring high reliability, low noise and radiation hardness. The output voltage can be adjusted to a low 0.8V with a droput voltage of 400mV at the full rated current of 3.0 Amps.
Published: |