MBR10.. Series, MBRB10.. Series
Bulletin PD-2.317 rev. F 07/03
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
MBR1035 / MBRB1035
35
MBR1045 / MBRB1045
45
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current
IFRM Peak Repetitive Forward
Current
IFSM Non Repetitive Peak
Surge Current
EAS Non-Repetitive Avalanche Energy
IAR Repetitive Avalanche Current
Values
10
20
1060
150
8
2
Units
Conditions
A @ TC = 135° C (Rated VR)
A Rated VR, square wave, 20kHz
TC = 135° C
5µs Sine or 3µs Following any rated load condition
A
Rect. pulse
and with rated VRRM applied
Surge applied at rated load conditions halfwave,
single phase, 60Hz
mJ TJ = 25 °C, IAS = 2 Amps, L = 4 mH
A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop
(1)
IRM Max. Instantaneus Reverse Current
(1)
VF(TO) Threshold Voltage
rt Forward Slope Resistance
CT Max. Junction Capacitance
LS Typical Series Inductance
dv/dt Max. Voltage Rate of Change
(Rated VR)
Values
0.84
0.57
0.72
0.1
15
0.354
17.6
600
8.0
10000
Thermal-Mechanical Specifications
Units
Conditions
V
V
V
mA
mA
V
mΩ
pF
nH
V/ µs
@ 20A
@ 10A
@ 20A
TJ = 25 °C
TJ = 125 °C
TJ = TJ max.
TJ = 25 °C
TJ = 125 °C
Rated DC voltage
VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
Measured from top of terminal to mounting plane
(1) Pulse Width < 300µs, Duty Cycle <2%
Parameters
TJ Max. Junction Temperature Range
Tstg Max. Storage Temperature Range
RthJC Max. Thermal Resistance
Junction to Case
RthCS Typical Thermal Resistance
Case to Heatsink
wt Approximate Weight
T Mounting Torque
Min.
Max.
Values
-65 to 150
-65 to 175
2.0
Units
Conditions
°C
°C
°C/W DC operation
0.50
2 (0.07)
6 (5)
12 (10)
°C/W Mounting surface, smooth and greased
Only for TO-220
g (oz.)
Kg-cm
(Ibf-in)
2 www.irf.com
