900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




International Rectifier Electronic Components Datasheet

PVD13 Datasheet

Photovoltaic Relay

No Preview Available !

Previous Datasheet
BOSFET® Photovoltaic Relay
Index
Next Data Sheet
PD 1.024D
Series PVD13
Microelectronic
Power IC Relay
Single-Pole, 500mA, 0-100V DC
General Description
The Photovoltaic DC Relay (PVD) is a single-pole, nor-
mally open solid state replacement for electro-me-
chanical relays used for general purpose switching of
analog signals. It utilizes as an output switch a unique
bidirectional (AC or DC) MOSFET power IC termed a
BOSFET. The BOSFET is controlled by a photovoltaic
generator of novel construction, which is energized by
radiation from a dielectrically isolated light emitting di-
ode (LED).
The PVD overcomes the limitations of both conven-
tional and reed electromechanical relays by offering
the solid state advantages of long life, high operating
speed, low pick-up power, bounce-free operation, low
thermal voltages and miniaturization. These advan-
tages allow product improvement and design innova-
tions in many applications such as process control,
multiplexing, telecommunications, automatic test
equipment and data acquisition.
The PVD can switch analog signals from thermocouple
level to 100 volts peak DC. Signal frequencies into the
RF range are easily controlled and switching rates up
to 2kHz are achievable. The extremely small thermally
generated offset voltages allow increased measure-
ment accuracies.
Unique silicon technology developed by International
Rectifier forms the heart of the PVD. The monolithic
BOSFET contains a bidirectional N-channel power
MOSFET output structure. In addition, this power IC
chip has input circuitry for fast turn-off and gate protec-
tion functions. This section of the BOSFET chip utilizes
both bipolar and MOS technology to form NPN transis-
tors, P-channel MOSFETs, resistors, diodes and ca-
pacitors.
The photovoltaic generator similarly utilizes a unique
International Rectifier alloyed multijunction structure.
The excellent current conversion efficiency of this tech-
nique results in the very fast response of the PVD mi-
croelectronic power IC relay.
This advanced semiconductor technology has created
a radically new control device. Designers can now de-
velop switching systems to new standards of electrical
performance and mechanical compactness.
PVD13 Features
BOSFET Power IC s
1010 Operations s
300µsec Operating Time s
3 milliwatts Pick-Up Power s
1000V/µsec dv/dt s
Bounce-Free s
8-pin DIP Package s
-40°C to 85°C s
UL recognized s
Part Identification
Part Number Operating
Voltage (DC)
PVD1352
0 – 100V
PVD1354
Sensitivity
5 mA
Off-State
Resistance
108 Ohms
1010 Ohms
(BOSFET is a trademark of International Rectifier)
To Order


International Rectifier Electronic Components Datasheet

PVD13 Datasheet

Photovoltaic Relay

No Preview Available !

Previous Datasheet
Index
Series PVD13 — BOSFET® Photovoltaic Relay
Next Data Sheet
Electrical Specifications (-40°C TA +85°C unless otherwise specified)
INPUT CHARACTERISTICS
Minimum Control Current (see figures 1 and 2)
For 300mA Continuous Load Current
For 400mA Continuous Load Current
For 150mA Continuous Load Current
Maximum Control Current for Off-State Resistance at 25°C
Control Current Range (Caution: current limit input LED. See figure 6)
Maximum Reverse Voltage
PVD1352 PVD1354
2.0
5.0
5.0
10
2.0 to 25
7.0
Units
DC
mA@25°C
mA@40°C
mA@85°C
µA(DC)
mA(DC)
V(DC)
OUTPUT CHARACTERISTICS
Operating Voltage Range
Maxiumum Load Current 40°C (see figures 1and 2)
Response Time @25°C (see figures 7 and 8)
Max. T(on) @ 12mA Control, 50 mA Load, 100 VDC
Max. T(off) @ 12mA Control, 50 mA Load, 100 VDC
Max. On-state Resistance 25°C (Pulsed) (fig. 4) 200 mA Load, 5mA Control
Min. Off-state Resistance 25°C @ 80 VDC (see figure 5)
Max. Thermal Offset Voltage @ 5.0mA Control
Min. Off-State dv/dt
Output Capacitance
PVD1352
PVD1354
0 to + 100
500
Units
V(PEAK)
mA(DC)
300 µs
50 µs
1.5
108
1010
0.2 µvolts
1000
V/µs
12 pF @ 50VDC
GENERAL CHARACTERISTICS (PVD1352 and PVD1354)
Dielectric Strength: Input-Output
Insulation Resistance: Input-Output @ 90VDC
Maximum Capacitance: Input-Output
Max. Pin Soldering Temperature (1.6mm below seating plane, 10 seconds max.)
Ambient Temperature Range:
Operating
Storage
2500
1012 @ 25°C - 50% RH
1.0
+260
-40 to +85
-40 to +100
Units
VRMS
pF
°C
To Order


Part Number PVD13
Description Photovoltaic Relay
Maker International Rectifier
PDF Download

PVD13 Datasheet PDF






Similar Datasheet

1 PVD13 Photovoltaic Relay
International Rectifier
2 PVD13NPBF Photovoltaic Relay
International Rectifier





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy