PVI5033RPBF Datasheet | International Rectifier

Series PVI5033RPb F Photovoltaic Isolator Solid-State Opto-Isolated MOSFET Gate Driver Dual-Channel, 5V, 5m A General Description The PVI5033R Photovoltaic Isolator is a dualchannel, opto-isolated driver capable of directly driving gates of power MOSFETs or IGBTs. It utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. The output is controlled by radiation from a Ga Al As light emitting diode (LED) which is optically isolated from the photovoltaic generator. The PVI5033R is ideally suited for applications requiring high-current and/or high voltage switching with optical isolation between the low-level driving circuitry and high-energy or high- voltage load circuits. It can be used for directly driving gates of power MOSFETs. The dual- channel configuration allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to provide higher-current drive for power MOSFETs or higher-voltage drive for IGBTs. PVI5033R employs a fast turn-off circuitry. PVI5033R Photovoltaic Isolators are packaged in an 8-pin, molded DIP package with either thru-hole or “gull-wing” terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Refer to Part Identification information. Features - Monolithic construction - 3,750 VRMS I/O isolation - 1,200 VDC output-to-output isolation - Dual-Channel application flexibility - Solid-State Reliability - UL Recognized and BABT Certified Applications - ÿ ÿ Telemunications - ÿ ÿ Load Distribution - ÿ ÿ Industrial Controls - ÿ ÿ Instrumentation and Measurement - ÿ ÿElectronic Ballast Part Identification PVI5033RPb F PVI5033RSPb F PVI5033RS-TPb F thru-hole SMT SMT, Tape and Reel 1 .irf. © 2015 International Rectifier Submit Datasheet Feedback April 24, 2015 Series PVI5033RPb F Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS Limits...