PVR13NPBF Datasheet | International Rectifier

Series PVR13NPb F Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Dual-Pole, Normally-Open, 0-100V AC/DC, 360m A General Description The PVR13 Series AC/DC Relay is a dual-pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analog signals. It utilizes International Rectifier’s HEXFET power MOSFETs as the output switches, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a Ga Al As light emitting diode (LED), which is optically isolated from the photovoltaic generator. The PVR13 Series overes the limitations of both conventional electromechanical and reed relays by offering the solid state advantages of long life, fast operating speed, low pick up power, bounce-free operation, low thermal offset voltages and miniature package. These advantages allow product improvement and design innovations in many applications such as process control, multiplexing, automatic test equipment and data acquisition. The PVR13 can switch analog signals from thermocouple level to 100 Volts peak AC or DC polarity. Signal frequencies into the RF range are easily controlled and switching rates up to 450Hz are achievable. The extremely small thermally generated offset voltages allow increased measurement accuracies. These relays are packaged in 16-pin, molded DIP packages and available with thru-hole leads, in plastic shipping tubes. Applications - Process Control - Data Acquisition - Test Equipment - Multiplexing and Scanning Features - Bounce-Free Operation - 1010 Off-State Resistance - 1,000 V/µsec dv/dt - 0.2 µV Thermal Offset - 5 m A Input Sensitivity - 1,500 VRMS I/O Isolation - Solid-State Reliability Part Identification PVR1300NPb F PVR1301NPb F (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 .irf. © 2015 International Rectifier Submit Datasheet Feedback June 02, 2015 Series PVR13NPb...