PVT212 Datasheet | International Rectifier

Data Sheet No. PD10061 Series PVT212 Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Single Pole, Normally Open, 0-150V, 550m A AC / 825m A DC General Description The PVT212 Series Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a Ga Al As light emitting diode (LED) which is optically isolated from the photovoltaic generator. These SSRs are specifically designed for industrial control and peripheral tele applications. Series PVT212 Relays are packaged in a 6-lead molded DIP package with either thru-hole or surface mount (‘gull-wing’) terminals. It iss available in standard plastic shipping tubes or on tape-and-reel. Please refer to part identification information . Applications ! Control of AC (up to 90 VAC) industrial loads ! Control of DC industrial loads up to +/-120 VDC ! Tele line switching Part Identification PVT212 thru-hole PVT212S surface-mount PVT212S-T surface-mount, Tape and Reel Features ! HEXFET Power MOSFET output ! Bounce-free operation ! 4,000 VRMS I/O isolation ! Very low on-resistance (RDD-ON) ! Linear AC/DC operation ! Solid-State Reliability ! UL recognition pending ! ESD Tolerance: 4000V Human Body Model 500V Machine Model (HEXFET is the registered trademark for International Rectifier Power MOSFETs) .irf. Series PVT212 Electrical Specifications (TA = +25°C unless otherwise specified) INPUT CHARACTERISTICS Minimum Control Current (see figure 1) Maximum Control Current for Off-State Resistance Control Current Range (Caution: current limit input LED, see figure 5) Maximum Reverse Voltage (1m A max) Limits 5.0 0.4 5.0 to 25 Units m A m A m A OUTPUT CHARACTERISTICS Operating Voltage Range Maximum Load...