PVT312PBF Datasheet | International Rectifier

Series PVT312Pb F Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-250V, 190m A AC/DC General Description The PVT312 Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a Ga Al As light emitting diode (LED) which is optically isolated from the photovoltaic generator. This SSR is specifically designed for tele applications. PVT312L employs an active currentlimiting circuitry enabling it to withstand current surge transients. PVT312 Relays are packaged in a 6-pin, molded DIP package with either thru-hole or surface mount ( “gull-wing”) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to the Part Identification information opposite. Features - HEXFET Power MOSFET output - Bounce-free operation - 4,000 VRMS I/O isolation - Load current limiting - Linear AC/DC operation - Solid-State Reliability - UL recognized and BABT certified; - ESD Tolerance: 4000V Human Body Model 500V Machine Model Applications - On/Off Hook switch - Dial-Out relay - Ring injection relay - Ground start - General switching Part Identification PVT312LPb F PVT312LSPb F PVT312LS-TPb F PVT312Pb F PVT312SPb F PVT312S-TPb F current limit, thru-hole current limit, surface-mount current limit, surface-mount, tape and reel no current limit, thru-hole no current limit, surface-mount no current limit, surface-mount tape and reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 .irf. © 2015 International Rectifier Submit Datasheet...