PVT322PBF Datasheet | International Rectifier

Series PVT322Pb F Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Single Pole, Normally Open, 0-250V, 170m A AC/DC General Description The PVT322 Series Photovoltaic Relay is a dualpole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a Ga Al As light emitting diode (LED) which is optically isolated from the photovoltaic generator. Series PVT322 Relays are packaged in an 8-pin, molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tapeand-reel. Please refer to Part Identification information opposite. Features HEXFET Power MOSFET output Bounce-free operation 4,000 VRMS I/O isolation Linear AC/DC operation Solid-State Reliability UL recognized and BABT certified Applications On/Off Hook switch Tip and Ring Line switching General switching Part Identification PVT322Pb F thru-hole PVT322SPb F Surface-mount PVT322S-TPb F Surface-mount, Tape and Reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 .irf. © 2015 International Rectifier Submit Datasheet Feedback June 02, 2015 Series PVT322Pb F Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS Limits Minimum Control Current (See figure1) Maximum Control Current for Off-State Resistance @TA=+25°C Control Current Range (Caution: current limit input LED, see figure 5) 0.4 2.0 to 25 Maximum Reverse Voltage OUTPUT CHARACTERISTICS Operating Voltage Range Maximum Load Current @ TA=+40°C 5m A Control (See figure 1) (single and dual channel operation) Maximum Peak Load Current (10ms maximum...