Datasheet4U Logo Datasheet4U.com

AN9614 - Using PRISM-Chip

Description

A.

The band pass filters shown between the HFA3624 and the HFA3724 labeled as BPF1a and BPF1b on Figure 1 are centered at IF and filter the spread wideband waveform before demodulation on the receive side and before the final upconversion on the transmit side.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN96106 Imahe Rejecting Front-Ends Philips
AN96116 CAN Transceiver Philips
AN96119 I2C Philips
AN96 CMOS Gate Array AMI
AN960 FLAT WASHER Skybolt Aeromotive

Other Datasheets by Intersil (Renesas)

Part Number Description
AN9515 Multiplier Improcers the Dynamic Range of Echo Systems
AN9827.2 Manual

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Using the PRISM® Chip Set for Low Data Rate Applications Application Note January 1997 AN9614.1 Authors: Carl Andren and John Fakatselis Introduction The PRISM chip set has been optimized to address high data rate applications with up to 4 MBPS data rates. The PRISM can also be utilized for low data rate applications. To implement low data rate applications (below 250 KBPS) the designer needs to address design considerations in the following areas: ™ Description A. External IF Filtering The band pass filters shown between the HFA3624 and the HFA3724 labeled as BPF1a and BPF1b on Figure 1 are centered at IF and filter the spread wideband waveform before demodulation on the receive side and before the final upconversion on the transmit side.
Published: |