Datasheet4U Logo Datasheet4U.com

EL2252 - Dual 50MHz Comparator/Pin Receiver

General Description

TEMP MIN TYP VOS Input Offset Voltage 25°C Full 1 TCVOS IB Average Offset Voltage Drift Input Bias Current at Null Full 25°C Full 7 6 IOS Input Offset Current 25°C Full 0.2 RIN, diff RIN, comm CIN VCM+ VCMAVOL Input Differential Resistance Input Common-Mode Resistance Input Capacitan

Key Features

  • Fast response.
  • 7ns.
  • Inputs tolerate large overdrives with no speed nor bias current penalties.
  • Propagation delay is relatively constant with variations of input Slew Rate, overdrive, temperature, and supply voltage.
  • Output provides proper CMOS or TTL logic levels.
  • Hysteresis is available on-chip.
  • Large voltage gain.
  • 8000V/V.
  • Not oscillation-prone.
  • Can detect 4ns glitches.
  • MIL-STD-883 Rev. C compli.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EL2252C Dual 50 MHz Comparator/Pin Receiver Elantec Semiconductor
EL2250 (EL2250 / EL2450) 125MHz Single Supply Dual/Quad Op Amps Intersil Corporation
EL2250C 125MHz Single Supply Dual/Quad Op Amps Elantec Semiconductor
EL2257C 125 MHz Single Supply/ Clamping Op Amps Elantec Semiconductor
EL2210C Low Cost/ Dual/ Triple and Quad Video Op Amps Elantec Semiconductor

Other Datasheets by Intersil (Renesas)

Part Number Description
EL2250 125MHz Single Supply Dual/Quad Op Amps
EL2257 Clamping Op Amp
EL2228 Dual Low Noise Amplifier
EL2244 Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp
EL2245 Dual/Quad Low-Power 100MHz Gain-of-2 Stable Op Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
cN1o®-On8t8aR8cE-tICONoOTBuDEMSraROTMtaSeLEcIESLNhThnDoEeirEcePwaDtRlwRSOwEuD.pPiUnpLtCoAeTrrCtsEiCl.MecnoEtmNeDTr/teasctcember 1995, Rev. E EL2252 FN7062 Dual 50MHz Comparator/Pin Receiver The EL2252 dual comparator replaces the traditional input buffer + attenuator +ECL comparator +ECL to TTL translator circuit blocks used in digital equipment. The EL2252 provides a quick 7ns propagation delay while complying with ±10V inputs. Input accuracy and propagation delay is maintained even with input signal Slew Rates as great as 4000V/µs. The EL2252 can run on supplies as low as -5.2V and +9V and comply with ECL and CMOS inputs, or use supplies as great as ±18V for much greater input range.