TW2964 Datasheet | Intersil

Features Video Decoder WD1 (960H) and D1 patible video decoding operation and it is programmable each channel NTSC (M, 4.43) and PAL (B, D, G, H, I, M, N, N bination), PAL (60) support with automatic format detection Software selectable analog inputs allows any of 2 CVBS per one video ADC Built-in analog anti-alias filter Four 10-bit ADCs and analog clamping circuit for CVBS input Fully programmable static gain or automatic gain control for the Y channel Programmable white peak control for CVBS channel 4-H adaptive b filter Y/C separation PAL delay line for color phase error correction Image enhancement with peaking and CTI Digital sub-carrier PLL for accurate color decoding Digital Horizontal PLL for synchronization processing and pixel sampling Advanced synchronization processing and sync detection for handling non-standard and weak signal Programmable hue, brightness, saturation, contrast, sharpness Automatic color control and color killer ITU-R 656 like YCb Cr (4:2:2) output or time multiplexed output with 36/72/144MHz for WD1 or 27/54/108MHz for D1 format Audio Codec Integrated five audio ADCs processing and one audio DAC Provides multi-channel audio mixed analog output Support I2S/DSP Master/Slave interface for record output and playback input PCM 8/16-bit and u-Law/A-Law 8-bit for audio word length Programmable audio sample rate that covers popular frequencies of 8/16/32/44.1/48k Hz Miscellaneous Two-wire MPU serial bus interface Integrated clock PLL for 144/108MHz clock output Power save and Power down mode Low power consumption Single 27MHz crystal for all standards and both WD1 and D1 format I/O Pin patible with TW2960 (Supply pins are different) 3.3V tolerant I/O 1.0V/3.3V power supply 100-pin and 128-pin LQFP packages 1 FN8288.0.1 August 2, 2012 1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas Inc. 2012. All Rights Reserved Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks...