TW9912 Datasheet | Intersil

Techwell PRODUCT BRIEF NTSC/PAL/SECAM Video Decoder with ponent Input and Progressive Output Support TW9912 Features Video decoder - NTSC (M, 4.43) and PAL (B, D, G, H, I, M, N, N bination), PAL (60), SECAM support with automatic format detection - Software selectable analog input control - VBI data pass through, raw ADC data output Programmable output cropping Analog Video Input - Triple 10-bit ADCs with independent clamping and gain control - Supports 480i/480p/576i/576p analog ponent input with SOG - Built-in analog anti-alias filter. - Fully programmable static gain or automatic gain control for the Y channel - Programmable white peak control for the Y channel - 4-H adaptive b filter Y/C separation - PAL delay line for color phase error correction - Image enhancement with peaking and CTI. - Digital sub-carrier PLL for accurate color decoding - Digital Horizontal PLL for synchronization processing and pixel sampling - Advanced synchronization processing and sync detection for handling non-standard and weak signal - Programmable hue, brightness, saturation, contrast, and sharpness. - Automatic color control and color killer - Chroma IF pensation Digital Output - ITU-R 656 patible YCb Cr(4:2:2) output format - Progressive ITU-R 656 output format support for both interlaced and progressive inputs. Miscellaneous - Two wire MPU serial bus interface .Data Sheet.co.kr - Power save and Power down mode - Low power...