Datasheet4U Logo Datasheet4U.com

ACS257MS - Radiation Hardened Quad 2-Input Multiplexer

General Description

The Radiation Hardened ACS257MS is a Quad 2-Channel multiplexer which selects four bits of data from one of two sources under the control of a single select pin.

The Output Enable input is active LOW and controls all outputs.

Key Features

  • QML Qualified Per MIL-PRF-38535 Requirements.
  • 1.25Micron Radiation Hardened SOS CMOS.
  • Radiation Environment - Latch-up Free Under any Conditions - Total Dose.
  • . . 3 x 105 RAD(Si) - SEU Immunity.
  • . 100MeV/(mg/cm2).
  • Input Logic Levels . . . VIL = (0.3)(VCC), VIH = (0.7)(VCC).
  • Output Current.
  • .

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACS0804 Compact Direct AC Line LED Driver Altoran
ACS101A Acapella Optical Modem Semtech Corporation
ACS102-5T1 AC LINE SWITCH STMicroelectronics
ACS102-5TA AC LINE SWITCH STMicroelectronics
ACS102-6T Transient protected AC switch STMicroelectronics

Other Datasheets by Intersil (now Renesas)

Part Number Description
ACS253MS Radiation Hardened Dual 4-Input Multiplexer
ACS20MS Radiation Hardened Dual 4-Input NAND Gate
ACS21MS Radiation Hardened Dual 4-Input AND Gate
ACS240MS Radiation Hardened Inverting/ Octal/ Three-State Buffer/Line Driver
ACS244MS Radiation Hardened Non-Inverting/ Octal/ Three-State Buffer/Line Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACS257MS November 1997 Radiation Hardened Quad 2-Input Multiplexer with Three-State Outputs Description The Radiation Hardened ACS257MS is a Quad 2-Channel multiplexer which selects four bits of data from one of two sources under the control of a single select pin. The Output Enable input is active LOW and controls all outputs. When OE is set HIGH, all outputs are configured into a high impedance state, regardless of all other input conditions. All inputs are buffered and the outputs are designed for balanced propagation delay and transition times. The ACS257MS is fabricated on a CMOS Silicon on Sapphire (SOS) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment.