Datasheet4U Logo Datasheet4U.com

CA3262 - Quad-Gated / Inverting Power Drivers

Description

The CA3262 and CA3262A are used to interface low-level logic to high current loads.

Each Power Driver has four inverting switches consisting of a non-inverting logic input stage and an inverting low-side driver output stage.

All inputs are 5V TTL/CMOS logic compatible and have a common Enable input.

Features

  • Independent Over-Current Limiting On Each Output Independent Over-Temperature Limiting On Each Output Output Drivers Capable of Switching 700mA Load Inputs Compatible With TTL or 5V CMOS Logic Suitable For Resistive, Lamp or Inductive Loads Power-Frame Package Construction For Good Heat Dissipation.
  • Operating Temperature Ranges - CA3262A.
  • . . . -40oC to 125oC - CA3262.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CA3262 Quad Gated / Inverting Power Drivers Harris Semiconductor
CA3262A Quad Gated / Inverting Power Drivers Harris Semiconductor
CA3220 CATV Amplifier TRW
CA3228 Speed Control System Harris Corporation
CA3232 20 Prescler RCA Solid State

Other Datasheets by Intersil (Renesas)

Part Number Description
CA3262A Quad-Gated / Inverting Power Drivers
CA3260 BiMOS Operational Amplifier
CA3260A BiMOS Operational Amplifier
CA3224E Automatic Picture Tube Bias Control Circuit
CA3227 High-Frequency NPN Transistor Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CA3262A, CA3262 August 1997 Quad-Gated, Inverting Power Drivers Description The CA3262 and CA3262A are used to interface low-level logic to high current loads. Each Power Driver has four inverting switches consisting of a non-inverting logic input stage and an inverting low-side driver output stage. All inputs are 5V TTL/CMOS logic compatible and have a common Enable input. Each output device has independent current limiting (ILIM) and thermal limiting (TLIM) for protection from over-load conditions. Steering diodes connected from each output (in pairs) to the Clamp pins may be used in conjunction with external zener diodes to protect the IC against over-voltage transients that result from inductive load switching.
Published: |