Datasheet4U Logo Datasheet4U.com

CA3262A - Quad-Gated / Inverting Power Drivers

This page provides the datasheet information for the CA3262A, a member of the CA3262 Quad-Gated / Inverting Power Drivers family.

Description

The CA3262 and CA3262A are used to interface low-level logic to high current loads.

Each Power Driver has four inverting switches consisting of a non-inverting logic input stage and an inverting low-side driver output stage.

All inputs are 5V TTL/CMOS logic compatible and have a common Enable input.

Features

  • Independent Over-Current Limiting On Each Output Independent Over-Temperature Limiting On Each Output Output Drivers Capable of Switching 700mA Load Inputs Compatible With TTL or 5V CMOS Logic Suitable For Resistive, Lamp or Inductive Loads Power-Frame Package Construction For Good Heat Dissipation.
  • Operating Temperature Ranges - CA3262A.
  • . . . -40oC to 125oC - CA3262.

📥 Download Datasheet

Datasheet preview – CA3262A

📁 Similar Datasheet

  • CA3262A - Quad Gated / Inverting Power Drivers (Harris Semiconductor)
  • CA3262 - Quad Gated / Inverting Power Drivers (Harris Semiconductor)
  • CA3220 - CATV Amplifier (TRW)
  • CA3228 - Speed Control System (Harris Corporation)
  • CA3232 - 20 Prescler (RCA Solid State)
  • CA3237 - IR Remote Control Amplifier (Harris)
  • CA324 - Operational Amplifiers (Intersil)
  • CA3240 - BiMOS Operational Amplifier (Renesas)
  • CA3240A - BiMOS Operational Amplifier (Renesas)
  • CA3240E - BiMOS Operational Amplifier (Renesas)
Other Datasheets by Intersil Corporation
  • CA3262 - Quad-Gated / Inverting Power Drivers
  • CA3260 - BiMOS Operational Amplifier
  • CA3260A - BiMOS Operational Amplifier
  • CA3224E - Automatic Picture Tube Bias Control Circuit
  • CA3227 - High-Frequency NPN Transistor Array
  • CA3242 - Quad-Gated Inverting Power Driver For Interfacing Low-Level Logic to High Current Load
  • CA3280 - Dual 9MHz Operational Transconductance Amplifier (OTA)
  • CA3280A - Dual 9MHz Operational Transconductance Amplifier (OTA)

Full PDF Text Transcription

Click to expand full text
CA3262A, CA3262 August 1997 Quad-Gated, Inverting Power Drivers Description The CA3262 and CA3262A are used to interface low-level logic to high current loads. Each Power Driver has four inverting switches consisting of a non-inverting logic input stage and an inverting low-side driver output stage. All inputs are 5V TTL/CMOS logic compatible and have a common Enable input. Each output device has independent current limiting (ILIM) and thermal limiting (TLIM) for protection from over-load conditions. Steering diodes connected from each output (in pairs) to the Clamp pins may be used in conjunction with external zener diodes to protect the IC against over-voltage transients that result from inductive load switching.
Published: |