Datasheet4U Logo Datasheet4U.com

CD4049BMS - CMOS Hex Buffer/Converter

Features

  • logic level conversion using only one supply (voltage (VCC). The input signal high level (VIH) can exceed the VCC supply voltage when this device is used for logic level conversions. This device is intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads. (VCC = 5V, VOL ≤ 0.4V, and IOL ≥ 3.3mA. The CD4049UBMS is designated as replacement for CD4009UB. Because the CD4049UBMS requires only one power supply, it is preferred over the CD4009UB and CD4010B and should be.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CD4049B Hex Inverter/Buffer Logic Silicon Supplies
CD4049A CMOS HEX BUFFERS/CONVERTERS RCA Solid State
CD4049UB CMOS HEX BUFFERS/CONVERTERS RCA
CD4049UB CMOS Hex Inverting Buffer/Converter Texas Instruments
CD4049UB (CD4049UB / CD4050B) CMOS Hex Buffer/Converters Harris Corporation

Other Datasheets by Intersil (Renesas)

Part Number Description
CD4049UBT CMOS Hex Buffer/Converter
CD4040BMS CMOS Ripple-Carry Binary Counter/Dividers
CD4041UBMS CMOS Quad True/Complement Buffer
CD4042BMS CMOS Quad Clocked D-Latch
CD4043BMS CMOS Quad 3 State R/S Latche

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CD4049UBMS Data Sheet December 1992 File Number 3315 CMOS Hex Buffer/Converter The CD4049UBMS is an inverting hex buffer and features logic level conversion using only one supply (voltage (VCC). The input signal high level (VIH) can exceed the VCC supply voltage when this device is used for logic level conversions. This device is intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads. (VCC = 5V, VOL ≤ 0.4V, and IOL ≥ 3.3mA. The CD4049UBMS is designated as replacement for CD4009UB. Because the CD4049UBMS requires only one power supply, it is preferred over the CD4009UB and CD4010B and should be used in place of the CD4009UB in all inverter, current driver, or logic level conversion applications.
Published: |