Datasheet4U Logo Datasheet4U.com

CD4049UBT - CMOS Hex Buffer/Converter

Description

only.

Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Features

  • logic level conversion using only one supply (voltage (VCC). The input signal high level (VIH) can exceed the VCC supply voltage when this device is used for logic level conversions. This device is intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads. (VCC = 5V, VOL ≤ 0.4V, and IOL ≥ 3.3mA. The CD4049UBT is the designated replacement for the CD4009UB. Because the CD4049UBT requires only one power supply, it is preferred over the CD4009UB and CD4010B and should.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CD4049UB CMOS HEX BUFFERS/CONVERTERS RCA
CD4049UB CMOS Hex Inverting Buffer/Converter Texas Instruments
CD4049UB (CD4049UB / CD4050B) CMOS Hex Buffer/Converters Harris Corporation
CD4049UBC Hex Inverting/Non-Inverting Buffer National Semiconductor
CD4049UBC Hex Inverting Buffer Fairchild Semiconductor

Other Datasheets by Intersil (Renesas)

Part Number Description
CD4049BMS CMOS Hex Buffer/Converter
CD4040BMS CMOS Ripple-Carry Binary Counter/Dividers
CD4041UBMS CMOS Quad True/Complement Buffer
CD4042BMS CMOS Quad Clocked D-Latch
CD4043BMS CMOS Quad 3 State R/S Latche

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CD4049UBT Data Sheet July 1999 File Number 4622.1 CMOS Hex Buffer/Converter Intersil’s Satellite Applications FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of reliability. The CD4049UBT is an Inverting Hex Buffer and features logic level conversion using only one supply (voltage (VCC). The input signal high level (VIH) can exceed the VCC supply voltage when this device is used for logic level conversions. This device is intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads. (VCC = 5V, VOL ≤ 0.4V, and IOL ≥ 3.3mA.
Published: |