CD4510BMS Datasheet | Intersil

CD4510BMS, CD4516BMS Data Sheet December 1992 File Number 3338 CMOS Presettable Up/Down Counters CD4510BMS Presettable BCD Up/Down Counter and the CD4516BMS Presettable Binary Up/Down counter consist of four synchronously clocked D-type flip-flops (with a gating structure to provide T-type flip-flop capability) connected as counters. These counters can be cleared by a high level on the RESET line, and can be preset to any binary number present on the jam inputs by a high level on the PRESET ENABLE line. The CD4510BMS will count out of non-BCD counter states in a maximum of two clock pulses in the up mode, and a maximum of four clock pulses in the down mode. If the CARRY IN input is held low, the counter advances up or down on each positive-going clock transition. Synchronous cascading is acplished by connecting all clock inputs in parallel and connecting the CARRY OUT of a less significant stage to the CARRY IN of a more significant stage. The CD4510BMS and CD4516BMS can be cascaded in the ripple mode by connecting the CARRY OUT to the clock of the next stage. If the UP/DOWN input changes during a terminal count, the CARRY OUT must be gated with the clock, and the UP/DOWN input must change while the clock is high. This method provides a clean clock signal to the subsequent counting stage. (See Figures 13, 14.) These devices are similar to types MC14510 and MC14516. The CD4510BMS and CD4516BMS are supplied in these 16-lead outline packages: Braze Seal DIP Frit Seal DIP Ceramic Flatpack - CD4510B Only - H4W †H45 - FBF †H1F H6W †CD4516B Only Features - High Voltage Types (20V Rating) - CD4510BMS - BCD Type - CD4516BMS - Binary Type - Medium Speed Operation - f CL = 8MHz Typ. at 10V - Synchronous Internal Carry Propagation - Reset and Preset Capability - 100% Tested for Quiescent Current at 20V - 5V, 10V and 15V Parametric Ratings - Standardized Symmetrical Output Characteristics - Maximum Input Current of 1µA at 18V Over Full Package Temperature Range; 100n A at 18V...