EL2186 Datasheet PDF (250MHz/3mA Current Mode Feedback Amp w/Disable)

EL2186 - 250MHz/3mA Current Mode Feedback Amp w/Disable

Description

Average Input Offset Voltage Drift VOS Matching + Input Current + IIN Matching - Input Current -IIN Matching Common Mode Rejection Ratio - Input Current Common Mode Rejection VCM = ±3.5V Power Supply Rejection Ratio - Input Current Power Supply Rejection Transimpedance + Input Resistance + Input C

Features

Single (EL2186) and dual (EL2286) topologies.
3mA supply current (per amplifier).
250MHz -3dB bandwidth.
Low cost.
Fast disable.
Powers down to 0mA.
Single- and dual-supply operation down to ±1.5V.
0.05%/0.05° diff. gain/diff. phase into 150Ω.
1200V/µs slew rate.
Large output drive current: -100mA (EL2186) -55mA (EL2286).
Also available without disable in single (EL2180), dual (EL2280) and quad (E.

Datasheet Details

Part number	EL2186
Manufacturer	Intersil Corporation
File Size	343.17 KB
Description	250MHz/3mA Current Mode Feedback Amp w/Disable
Datasheet	EL2186 Datasheet
Additional preview pages of the EL2186 datasheet.

📁 Similar Datasheet

EL2186C - 250MHz/3mA Current Mode Feedback Amp w/Disable (Elantec Semiconductor)

EL2180C - 250MHz / 3mA Current Mode Feedback Amplifiers (Elantec Semiconductor)

EL211 - 8 PIN SOP PHOTOTRANSISTOR PHOTOCOUPLER (Everlight)

EL212 - 8 PIN SOP PHOTOTRANSISTOR PHOTOCOUPLER (Everlight)

EL2120 - 100MHz Current Feedback Amplifier (Intersil)

EL2120C - 100 MHz Current Feedback Amplifier (Elantec)

EL2125 - Wideband Amplifier (Renesas)

EL2126 - Ultra-Low Noise/ Low Power/ Wideband Amplifier (Intersil)

EL2126C - Ultra-low Noise/ Low Power/ Wideband Amplifier (Elantec)

EL213 - 8 PIN SOP PHOTOTRANSISTOR PHOTOCOUPLER (Everlight)

Full PDF Text Transcription

Click to expand full text

® EL2186, EL2286 Data Sheet September 26, 2001 FN7056 250MHz/3mA Current Mode Feedback Amp w/Disable The EL2186/EL2286 are single/dual current-feedback operational amplifiers which achieve a -3dB bandwidth of 250MHz at a gain of +1 while consuming only 3mA of supply current per amplifier. They will operate with dual supplies ranging from ±1.5V to ±6V, or from single supplies ranging from +3V to +12V. The EL2186/EL2286 also include a disable/power-down feature which reduces current consumption to 0mA while placing the amplifier output in a high impedance state. In spite of its low supply current, the EL2286 can output 55mA while swinging to ±4V on ±5V supplies. The EL2186 can output 100mA with similar output swings.

Published: Apr 2, 2005 |