Datasheet4U Logo Datasheet4U.com

HFA3766 - 400MHz AGC Quadrature IF Modulator/Demodulator

Description

PIN 1 SYMBOL AGC1_BYP+ DESCRIPTION DC feedback pin for AGC amplifier 1.

Requires good decoupling and minimum wire length to a solid signal ground.

Non-inverting analog input of AGC amplifier 1.

Features

  • all the necessary blocks for baseband modulation and demodulation of I and Q signals. It has a two stage integrated AGC IF amplifier with 82dB of voltage gain and 76dB of gain control range. Baseband antialiasing is integrated into the design. Four filter bandwidths are programmable via a two bit digital control interface. In addition, these filters are continuously tunable over a ±20% frequency range via one external resistor. For baseband modulation digital I and Q data are delivered to the tra.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HFA3046 Ultra High Frequency Transistor Arrays Renesas
HFA3096 Ultra High Frequency Transistor Arrays Renesas
HFA30PA40C Ultrafast Soft Recovery Diode nELL
HFA30PA60C Ultrafast Rectifier INCHANGE
HFA30PA60C Soft Recovery Diode International Rectifier

Other Datasheets by Intersil (Renesas)

Part Number Description
HFA3761 400MHz AGC and Quadrature IF Demodulator
HFA3763 400MHz Quadrature Modulator and AGC
HFA3767 130MHz CDMA/AMPS Quadrature Modulator and AGC
HFA3724 400MHz Quadrature IF Modulator/Demodulator
HFA3726 400MHz Quadrature IF Modulator/Demodulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HFA3766 PRELIMINARY January 1999 File Number 4328.1 400MHz AGC Quadrature IF Modulator/Demodulator The HFA3766 is a highly integrated baseband converter for quadrature modulation applications. It features all the necessary blocks for baseband modulation and demodulation of I and Q signals. It has a two stage integrated AGC IF amplifier with 82dB of voltage gain and 76dB of gain control range. Baseband antialiasing is integrated into the design. Four filter bandwidths are programmable via a two bit digital control interface. In addition, these filters are continuously tunable over a ±20% frequency range via one external resistor. For baseband modulation digital I and Q data are delivered to the transmit section.
Published: |