900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Intersil Electronic Components Datasheet

HIP6008 Datasheet

Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor

No Preview Available !

Data Sheet
HIP6008
March 2000 File Number 4281.2
Buck Pulse-Width Modulator (PWM)
Controller and Output Voltage Monitor
The HIP6008 provides complete control and protection for a
DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive an
N-Channel MOSFET in a standard buck topology. The
HIP6008 integrates all of the control, output adjustment,
monitoring and protection functions into a single package.
The output voltage of the converter is easily adjusted and
precisely regulated. The HIP6008 includes a 4-Input Digital-
to-Analog Converter (DAC) that adjusts the output voltage
from 2.0VDC to 3.5VDC in 0.1V increments. The precision
reference and voltage-mode regulator hold the selected
output voltage to within ±1.5% over temperature and line
voltage variations.
The HIP6008 provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is
adjustable from below 50kHz to over 1MHz. The error
amplifier features a 15MHz gain-bandwidth product and
6V/µs slew rate which enables high converter bandwidth for
fast transient performance. The resulting PWM duty ratio
ranges from 0% to 100%.
The HIP6008 monitors the output voltage with a window
comparator that tracks the DAC output and issues a Power
Good signal when the output is within ±10%. The HIP6008
protects against over-current conditions by inhibiting PWM
operation. Built-in over-voltage protection triggers an
external SCR to crowbar the input supply. The HIP6008
monitors the current by using the rDS(ON) of the upper
MOSFET which eliminates the need for a current sensing
resistor.
Pinout
HIP6008
(SOIC)
TOP VIEW
Features
• Drives N-Channel MOSFET
• Operates From +5V or +12V Input
• Simple Single-Loop Control Design
- Voltage-Mode PWM Control
• Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
• Excellent Output Voltage Regulation
- ±1.5% Over Line Voltage and Temperature
• 4 Bit Digital-to-Analog Output Voltage Selection
- Wide Range . . . . . . . . . . . . . . . . . . .2.0VDC to 3.5VDC
- 0.1V Binary Steps
• Power-Good Output Voltage Monitor
• Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element
- Uses MOSFET’s rDS(ON)
• Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from
50kHz to over 1MHz
Applications
Power Supply for Pentium®, Pentium Pro, PowerPC™ and
Alpha™ Microprocessors
High-Power 5V to 3.xV DC-DC Regulators
Low-Voltage Distributed Power Supplies
Ordering Information
TEMP.
PART NUMBER RANGE (oC)
PACKAGE
HIP6008CB
0 to 70 16 Ld SOIC
PKG.
NO.
M16.15
OCSET 1
SS 2
VID0 3
VID1 4
VID2 5
VID3 6
COMP 7
FB 8
16 VSEN
15 RT/OVP
14 VCC
13 BOOT
12 UGATE
11 PHASE
10 PGOOD
9 GND
Alpha™ is a trademark of Digital Equipment Corporation.
Pentium® is a registered trademark of Intel Corporation.
PowerPC™ is a trademark of IBM.
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 2000


Intersil Electronic Components Datasheet

HIP6008 Datasheet

Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor

No Preview Available !

HIP6008
Typical Application
PGOOD
SS
RT/OVP
12V
VCC
MONITOR AND
PROTECTION
OCSET
BOOT
OSC
VID0
VID1
VID2
VID3
FB
HIP6008
D/A
-
++
-
COMP
VSEN
UGATE
PHASE
GND
VIN = +5V OR +12V
+VOUT
Block Diagram
VSEN
OCSET
VID0
VID1
VID2
VID3
FB
COMP
110%
90%
115%
REFERENCE
200µA
D/A
CONVERTER
(DAC)
DACOUT
VCC
+-
+-
OVER-
VOLTAGE
+-
+- OVER-
CURRENT
4V
POWER-ON
RESET (POR)
SOFT-
START
+
-
ERROR
AMP
PWM
COMPARATOR
INHIBIT
+- PWM
GATE
CONTROL
LOGIC
10µA
OSCILLATOR
PGOOD
SS
BOOT
UGATE
PHASE
GND
RT/OVP
2


Part Number HIP6008
Description Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor
Maker Intersil Corporation
Total Page 12 Pages
PDF Download

HIP6008 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 HIP6002 Rectifier (PWM) Controller and Output Voltage Monitor
Intersil Corporation
2 HIP6003 Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor
Intersil Corporation
3 HIP6004 Buck and Synchronous-Rectifier (PWM) Controller and Output Voltage Monitor
Renesas
4 HIP6004A PWM Controller and Output Voltage Monitor
Renesas
5 HIP6004B PWM Controller and Output Voltage Monitor
Renesas
6 HIP6004D PWM Controller and Output Voltage Monitor
Renesas
7 HIP6004E PWM Controller and Output Voltage Monitor
Renesas
8 HIP6005 PWM Controller and Output Voltage Monitor
Renesas
9 HIP6005A Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor
Intersil Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy