900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Intersil Electronic Components Datasheet

QHX220 Datasheet

Active Isolation Enhancer and Interference Canceller

No Preview Available !

Active Isolation Enhancer and Interference Canceller
QHx220
Features
Electromagnetic Interference (EMI) is emerging as a
major concern in next generation wireless
communication systems. As wireless terminals now
support multiple services and features that utilize high
data rates simultaneously, removing interference within
wireless terminals like handsets has become a challenge.
Reducing the Electromagnetic Interference recovers
the receiver sensitivity, enabling simultaneous
operation of multiple radios, and improves the overall
quality of service of communication devices. Intersil’s
QHx220 is situated in a handset to sample the source
of the noise and emulate the RF coupling channel
between the noise source and victim receiver antenna.
In doing so, an anti-noise signal can be applied directly
to the victim receive path to cancel the EMI and
achieve the signal integrity benefits. This approach
makes it possible to cancel both in-band (within the
victim Rx band) or out-of-band aggressors. This is a
revolutionary approach since it is only possible to
cancel out of band noise using conventional Rx filters.
In addition QHx220 may be used to increase the
inherent isolation between antennas or inside duplexers
and switches, thus allowing to increase the transmit
power in repeaters or yielding higher sensitivity in the
receivers. Both measures finally resulting in a better
coverage, larger cell size, smaller antennas or lower
power of infrastructure components such as
basestations, pico-and Femtocells as well as repeaters.
The QHx220 integrates the sampler path LNA gain stages
as well as the DACs required to control the I and Q
control voltages (used to set the magnitude and phase of
www.tDhaetacSahneecte4lUla.ctioomn signal). Both the gain, and control
voltages are programmable using a SPI bus interface.
• Protocol agnostic. Designed for: GSM, CDMA, DVB-H,
ISDB-T, DMB
• Frequency Range 300MHz to 3GHz
• Integrated, programmable LNA gain stages in the
sampler path
• SPI bus controlled integrated DACs
• >20dB Noise Cancellation is possible
• 50dB typical Dynamic Range
• Low Power Consumption (<20mW typical, ~2µW
standby)
• Ultra Small ~ 1mm2 devices are available as tested
bumped die or 3x3mm2 QFN package
Applications
• Most any wireless device with a local aggressor:
- Cell phones
- Mobile TV devices
- Laptop Computers
- GPS terminals
- Pico- and Femtocells
• Improved Tx to Rx Isolation of devices (i.e. duplexer,
switches) or between neighboring antennae
• Basestations
• Linearization of PAs
Typical Application Circuit
Benefits
• Actively cancels unwanted local RF noise
• Improves BER, receiver sensitivity, C/N by canceling
noise generated from local aggressors
• Improves isolation between adjacent antennas
• Can be used to cancel in-band or out-of-band
interferers (i.e. spurs, harmonics, phase noise, or
other noise sources like IM products generated in a
PA)
• Enables simultaneous operation of multiple
co-located radios
• Improves overall quality of service
FIGURE 1. ACTIVE ISOLATION ENHANCER AND NOISE
CANCELLER
October 20, 2009
FN6986.0
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.


Intersil Electronic Components Datasheet

QHX220 Datasheet

Active Isolation Enhancer and Interference Canceller

No Preview Available !

QHx220
Ordering Information
PART NUMBER
(Note 1)
PART MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG. DWG. #
QHX220IQT7
QH220
-40 to +85
16 Ld QFN
7” Prod. Tape & Reel; Qty 1,000
L16.3x3B
QHX220IQSR
QH220
-40 to +85
16 Ld QFN
7” Sample Reel; Qty 100
L16.3x3B
Coming Soon
220
QHX220ICT7 (Note 2)
-40 to +85
9 Ball CSP
7” Prod. Tape & Reel; Qty 1,000
TBD
Coming Soon
220
QHX220ICSR (Note 2)
-40 to +85
9 Ball CSP
7” Sample Reel; Qty 100
TBD
NOTES:
1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2. Contact Intersil Marketing for availability.
Pin Configurations
QHx220
(16 LD QFN)
TOP VIEW
16 15 14 13
GND1 1
SAMPLER IN 2
GND1 3
ENBAR 4
12 GND2
11 RF OUT
10 GND2
9 BUS ENABLE
5678
www.DataSheet4U.com
QHx220
(9 BALL CSP)
TOP VIEW
123
GND
RF IN
ENBAR
A
INDUCTOR DATA
CLK
B
VDD
RF OUT BUSEN
C
Pin Descriptions
QFN PIN #
QFN PIN NAME
1, 3, 10, 12, 16
GNDx
2 SAMPLER IN
4 ENBAR
5, 13
VDDx
6 CLK
7 DATA
8 EXTR
9 BUS ENABLE
11 RF OUT
14 NC
15 IND
- Exposed Center Pad
CSP PIN #
1A
2A
3A
1C
3B
2B
-
3C
2C
-
1B
-
CSP PIN NAME
DESCRIPTION
GND
Ground
RF IN
RF Input
ENBAR
Enable (active low) Tied to GND
VDD
1.8V Power Supply
CLK Input Clock (SPI)
DATA
Data Line (SPI)
- External Resistor for Gain Tempco Control
BUSEN
Bus Enable (active low, SPI)
RF OUT
RF Output
- No Connect
INDUCTOR External Inductor for LNA
- Ground
2 FN6986.0
October 20, 2009


Part Number QHX220
Description Active Isolation Enhancer and Interference Canceller
Maker Intersil Corporation
PDF Download

QHX220 Datasheet PDF






Similar Datasheet

1 QHX220 Active Isolation Enhancer and Interference Canceller
Intersil Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy