Datasheet4U Logo Datasheet4U.com

X4003 - CPU Supervisor

Datasheet Summary

Description

These devices combine three popular functions, Power-on Reset Control, Watchdog Timer, and Supply Voltage Supervision.

This combination lowers system cost, reduces board space requirements, and increases reliability.

Features

  • Selectable watchdog timer.
  • Select 200ms, 600ms, 1.4s, off.
  • Low VCC detection and reset assertion.
  • Five standard reset threshold voltages nominal 4.62V, 4.38V, 2.92V, 2.68V, 1.75V.
  • Adjust low VCC reset threshold voltage using special programming sequence.
  • Reset signal valid to VCC = 1V.
  • Low power CMOS.
  • 12µA typical standby current, watchdog on.
  • 800nA typical standby current watchdog off.
  • 3mA active current.

📥 Download Datasheet

Datasheet preview – X4003

Datasheet Details

Part number X4003
Manufacturer Intersil Corporation
File Size 302.08 KB
Description CPU Supervisor
Datasheet download datasheet X4003 Datasheet
Additional preview pages of the X4003 datasheet.

📁 Similar Datasheet

  • X4003 - CPU Supervisor (Xicor)
  • X4003 - CPU Supervisor (Renesas)
  • X40010 - Dual Voltage Monitor with Integrated CPU Supervisor (Xicor)
  • X40010 - Dual Voltage Monitor (Renesas)
  • X40011 - Dual Voltage Monitor with Integrated CPU Supervisor (Xicor)
  • X40011 - Dual Voltage Monitor (Renesas)
  • X40014 - Dual Voltage Monitor with Integrated CPU Supervisor (Xicor)
  • X40014 - Dual Voltage Monitor (Renesas)
  • X40015 - Dual Voltage Monitor with Integrated CPU Supervisor (Xicor)
  • X40015 - Dual Voltage Monitor (Renesas)
Other Datasheets by Intersil Corporation
  • X40030 - Triple Voltage Monitor
  • X40031 - Triple Voltage Monitor
  • X40034 - Triple Voltage Monitor
  • X40035 - Triple Voltage Monitor
  • X40020 - Dual Voltage Monitor
  • X40021 - Dual Voltage Monitor
  • X4005 - CPU Supervisor
  • X40410 - Dual Voltage Monitor

Full PDF Text Transcription

Click to expand full text
® X4003, X4005 Data Sheet May 11, 2006 FN8113.1 CPU Supervisor FEATURES • Selectable watchdog timer —Select 200ms, 600ms, 1.4s, off • Low VCC detection and reset assertion —Five standard reset threshold voltages nominal 4.62V, 4.38V, 2.92V, 2.68V, 1.75V —Adjust low VCC reset threshold voltage using special programming sequence —Reset signal valid to VCC = 1V • Low power CMOS —12µA typical standby current, watchdog on —800nA typical standby current watchdog off —3mA active current • 400kHz I2C interface • 1.8V to 5.5V power supply operation • Available packages —8 Ld SOIC —8 Ld MSOP • Pb-free plus anneal available (RoHS compliant) www.DataSheet4U.com DESCRIPTION These devices combine three popular functions, Power-on Reset Control, Watchdog Timer, and Supply Voltage Supervision.
Published: |