Datasheet4U Logo Datasheet4U.com

X4283 - CPU Supervisor

General Description

The X4283, X4285 combines four popular functions, Power-on Reset Control, Watchdog Timer, Supply Voltage Supervision, and Block Lock protect serial EEPROM memory in one package.

This combination lowers system cost, reduces board space requirements, and increases reliability.

Key Features

  • Selectable watchdog timer.
  • Low VCC detection and reset assertion.
  • Four standard reset threshold voltages.
  • Adjust low VCC reset threshold voltage using special programming sequence.
  • Reset signal valid to VCC = 1V.
  • Low power CMOS.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
X4283 CPU Supervisor Xicor
X4285 CPU Supervisor Xicor
X4202S 200Volt Insulated Fast Recovery Diode Thinki Semiconductor
X4202S Silicon Diode Sanken

Other Datasheets by Intersil (Renesas)

Part Number Description
X4285 CPU Supervisor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® X4283, X4285 128K, 16K x 8 Bit Data Sheet May 23, 2006 FN8121.1 CPU Supervisor with 128K EEPROM FEATURES • Selectable watchdog timer • Low VCC detection and reset assertion —Four standard reset threshold voltages —Adjust low VCC reset threshold voltage using special programming sequence —Reset signal valid to VCC = 1V • Low power CMOS —<20µA max standby current, watchdog on —<1µA standby current, watchdog OFF —3mA active current • 128Kbits of EEPROM —64 byte page write mode —Self-timed write cycle —5ms write cycle time (typical) • Built-in inadvertent write protection —Power-up/power-down protection circuitry —Protect 0, 1/4, 1/2, all or 64, 128, 256 or 512 bytes of EEPROM array with programmable Block Lock™ protection • 400kHz 2-wire interface www.DataSheet4U.com • 2.7V to 5.