X5169
Overview
- Low VCC Detection and Reset Assertion - Five standard reset threshold voltages - Re-program low VCC reset threshold voltage using special programming sequence - Reset signal valid to VCC = 1V
- Long Battery Life with Low Power Consumption - <50µA max standby current, watchdog on - <1µA max standby current, watchdog off - <400µA max active current during read
- 16Kbits of EEPROM
- Built-in Inadvertent Write Protection - Power-up/power-down protection circuitry - Protect 0, 1/4, 1/2 or all of EEPROM array with Block Lock™ protection - In circuit programmable ROM mode
- 2MHz SPI Interface Modes (0,0 & 1,1)
- Minimize EEPROM Programming Time - 32-byte page write mode - Self-timed write cycle - 5ms write cycle time (typical)
- 2.7V to 5.5V and 4.5V to 5.5V Power Supply Operation
- Available Packages - 14 Ld TSSOP, 8 Ld SOIC, 8 Ld PDIP
- Pb-Free Plus Anneal Available (Ro
