900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Intersil Electronic Components Datasheet

X96011 Datasheet

Temperature Sensor

No Preview Available !

c1No-8On8taR8c-EItNCOoTOuBErMSRTOMSeLEcILEhNTnoDEirDcEwaPDalwRtRSawOuES.DpiPnhUpLteoeCAerrTCstt iCEl.MecnoEtmNer/Ttsact
Temperature Sensor with Look-Up Table
Memory and DAC
The X96011 is a highly integrated bias controller which
incorporates a digitally controlled Programmable Current
Generator and temperature compensation using one look-up
table. All functions of the device are controlled via a 2-wire
digital serial interface.
The temperature compensated Programmable Current
Generator varies the output current with temperature
according to the contents of the associated nonvolatile
look-up table. The look-up table may be programmed with
arbitrary data by the user, via the 2-wire serial port, and an
internal temperature sensor is used to control the output
current response.
Ordering Information
PART
NUMBER
PART
TEMP
PKG.
MARKING RANGE (°C) PACKAGE DWG. #
X96011V14I X9601 1V I -40 to +100 14 Ld TSSOP M14.173
X96011V14IZ X9601 1VIZ -40 to +100 14 Ld TSSOP M14.173
(Note)
(Pb-free)
NOTE: These Intersil Pb-free plastic packaged products employ special
Pb-free material sets; molding compounds/die attach materials and 100%
matte tin plate PLUS ANNEAL - e3 termination finish, which is RoHS
compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Pinout
X96011
(14 LD TSSOP)
TOP VIEW
A0 1
A1 2
A2 3
VCC 4
WP 5
SCL 6
SDA 7
14 NC
13 NC
12 NC
11 VSS
10 NC
9 NC
8 IOUT
February 25, 2008
X96011
FN8215.2
Features
• Single Programmable Current Generator
- ±1.6mA Max.
- 8-bit (256 Step) Resolution
- Internally Programmable Full Scale Current Outputs
Internal Voltage Reference
• Integrated 8-bit A/D Converter
• Temperature Compensation
- Internal Sensor
- -40°C to +100°C Range
- 2.2°C/step resolution
- EEPROM Look-up Table
• Hot Pluggable
• Write Protection Circuitry
- Intersil BlockLock™
- Logic Controlled Protection
• 2-wire Bus with 3 Slave Address Bits
• 3V to 5.5V, Single Supply Operation
• Package
- 14 LD TSSOP
• Pb-Free available (RoHS Compliant)
Applications
• PIN Diode Bias Control
• RF PA Bias Control
• Temperature Compensated Process Control
• Laser Diode Bias Control
• Fan Control
• Motor Control
• Sensor Signal Conditioning
• Data Aquisition Applications
• Gain vs Temperature Control
• High Power Audio
• Open Loop Temperature Compensation
• Close Loop Current, Voltage, Pressure, Temperature,
Speed, Position Programmable Voltage Sources,
Electronic Loads, Output Amplifiers or Function Generator
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005, 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.


Intersil Electronic Components Datasheet

X96011 Datasheet

Temperature Sensor

No Preview Available !

Block Diagram
VOLTAGE
REFERENCE
ADC
TEMPERATURE
SENSOR
MUX
LOOK-UP
TABLE
MUX
DAC
IOUT
SDA
SCL
WP
A2, A1, A0
Pin Description
2-WIRE
INTERFACE
CONTROL
AND STATUS
PIN
NUMBER
1
2
3
4
5
6
7
8
9, 10,
12,13,14
11
PIN
NAME
A0
A1
A2
VCC
WP
SCL
SDA
IOUT
NC
DESCRIPTION
Device Address Select Pin 0. This pin determines the LSB of the device address
required to communicate using the 2-wire interface. The A0 pin has an on-chip pull-down resistor.
Device Address Select Pin 1. This pin determines the intermediate bit of the device address required to communicate
using the 2-wire interface. The A1 pin has an on-chip pull-down resistor.
Device Address Select Pin 2. This pin determines the MSB of the device address required to communicate using the
2-wire interface. The A2 pin has an on-chip pull-down resistor.
Supply Voltage.
Write Protect Control Pin. This pin is a CMOS compatible input. When LOW, Write Protection is enabled preventing
any “Write” operation. When HIGH, various areas of the memory can be protected using the Block Lock bits BL1 and
BL0. The WP pin has an on-chip pull-down resistor, which enables the Write Protection when this pin is left floating.
Serial Clock. This is a TTL compatible input pin. This input is the 2-wire interface clock controlling data input and output
at the SDA pin.
Serial Data. This pin is the 2-wire interface data into or out of the device. It is TTL
compatible when used as an input, and it is Open Drain when used as an output. This pin requires an external pull up
resistor.
Current Generator Output. This pin sinks or sources current. The magnitude and direction of the current is fully
programmable and adaptive. The resolution is 8 bits.
No Connect.
VSS Ground.
2 FN8215.2
February 25, 2008


Part Number X96011
Description Temperature Sensor
Maker Intersil Corporation
PDF Download

X96011 Datasheet PDF






Similar Datasheet

1 X96010 Sensor Conditioner
Intersil Corporation
2 X96011 Temperature Sensor
Intersil Corporation
3 X96012 Universal Sensor Conditioner
Intersil Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy