ZL6100 Datasheet | Intersil

features . The ZL6100 is designed to be a flexible building block for DC power and can be easily adapted to designs ranging from a single-phase power supply operating from a 3.3V input to a multi-phase supply operating from a 12V input. The ZL6100 eliminates the need for plicated power supply managers as well as numerous external discrete ponents. All operating features can be configured by simple pin-strap/resistor selection or through the SMBus™ serial interface. The ZL6100 uses the PMBus™ protocol for munication with a host controller and the Digital-DC bus for munication between other Zilker Labs devices. Ordering Information PART NUMBER PART (Notes 1, 2, 3) MARKING TEMP. RANGE (°C) PACKAGE PKG. (Pb-Free) DWG. # ZL6100ALAF (Note 4) -40 to +85 36 Ld QFN L36.6x6C ZL6100ALBF 6100 -40 to +85 36 Ld QFN L36.6x6C NOTES: 1. Add “T- ” suffix for tape and reel. Please refer to TB347 for details on reel specifications. 2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding pounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is Ro HS pliant and patible with both Sn Pb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pbfree requirements of IPC/JEDEC J STD-020. 3. For Moisture Sensitivity Level (MSL), please see device information page for ZL6100. For more information on MSL, please see Technical Brief TB363. 4. Only for customers that do not want to order new firmware. Features Power Conversion - Efficient Synchronous Buck Controller - Adaptive Light Load Efficiency Optimization - 3V to 14V Input Range - 0.54V to 5.5V Output Range (with Margin) - ±1% Output Voltage Accuracy - Internal 3A MOSFET Drivers - Fast Load Transient Response - Current Sharing and Phase Interleaving - Snapshot™ Parameter Capture - 36 Ld 6mmx6mm QFN Package - Pb-Free (Ro HS pliant) Power Management - Digital...