Datasheet4U Logo Datasheet4U.com

JMB353 - 1394a + USB20 to SATA Host Adapter

General Description

The JMB353 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device.

highly integrated USB 2.0, 1394a and SATA Phys technology provides a cost-effective solution to apply USB to SATA device or 1394 to SATA device enclosure.

Key Features

  • Complies with Gen1i/Gen1m of Serial ATA II Electrical Specification 2.5 Supports SATA II Asynchronous Signal Recovery (Hot Plug) feature Complies with USB 2.0 Specification Complies with USB Mass Storage Class, Bulk-Only Transport Specification Supports USB High-Speed and Full-Speed Operation Complies with IEEE Std 1394-1995 and IEEE 1394a-2000 Specifications Supports Asynchronous Transfers at 100/200 and 400 Mb/s for 1394a Supports 1394a SBP-2 Acceleration Feature to optimize performance www. Da.

📥 Download Datasheet

Datasheet Details

Part number JMB353
Manufacturer JMicron
File Size 360.77 KB
Description 1394a + USB20 to SATA Host Adapter
Datasheet download datasheet JMB353 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
JMB368 PCI Express to PATA Host Controller JMicron Technology

Other Datasheets by JMicron

Part Number Description
JMB350 SATA II Port Multiplier
JMB352 High-Speed USB & SATA II Combo to Dual SATA II RAID Bridge
JMB352U High-Speed USB & SATA II Combo to Dual SATA II Port Multiplier(1 to 2) Bridge
JMB355 eSATA+1394A/B + USB20 to SATA Host Adapter
JMB356 eSATA+1394A/B + USB20 to Dual SATA Host Adapter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
JMicron/JMB353 JMB353 1394a + USB20 to SATA Host Adapter Description The JMB353 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device. The highly integrated USB 2.0, 1394a and SATA Phys technology provides a cost-effective solution to apply USB to SATA device or 1394 to SATA device enclosure. The USB adheres to the Mass Storage Class Bulk-Only Transport Specification. The embedded command parser supports both ATA and ATAPI command set with LBA48 bit addressing capability. The 1394 adheres to SBP-2 specification. And SBP-2 acceleration hardware is embedded to off-load CPU and easy firmware control. Features Complies with Gen1i/Gen1m of Serial ATA II Electrical Specification 2.