Datasheet4U Logo Datasheet4U.com

JMB356 - eSATA+1394A/B + USB20 to Dual SATA Host Adapter

General Description

The JMB356 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device.

highly integrated USB 2.0, 1394A/B and SATA Phys technology provides a cost-effective solution to apply SATA to SATA device or USB to SATA device or 1394 to SATA device enclosure.

Key Features

  • Compliance with Gen1i/Gen1m of Serial ATA II Electrical Specification 2.6 Support SATA II Asynchronous Signal Recovery (Hot Plug) feature Compliance with USB 2.0 electrical specification Support USB High-Speed and Full-Speed Operation Compliance with USB Mass Storage Class, Bulk-Only Transport Specification Support Asynchronous Transfers at 100/200 and 400 Mb/s for 1394a www. DataSheet. co. kr Support 1394A/B SBP-2 Acceleration Feature to optimize performance Compliance with IEEE Std 1394-1995, IE.

📥 Download Datasheet

Datasheet Details

Part number JMB356
Manufacturer JMicron
File Size 172.44 KB
Description eSATA+1394A/B + USB20 to Dual SATA Host Adapter
Datasheet download datasheet JMB356 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
JMB368 PCI Express to PATA Host Controller JMicron Technology

Other Datasheets by JMicron

Part Number Description
JMB350 SATA II Port Multiplier
JMB352 High-Speed USB & SATA II Combo to Dual SATA II RAID Bridge
JMB352U High-Speed USB & SATA II Combo to Dual SATA II Port Multiplier(1 to 2) Bridge
JMB353 1394a + USB20 to SATA Host Adapter
JMB355 eSATA+1394A/B + USB20 to SATA Host Adapter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
JMicron/JMB356 JMB356 eSATA+1394A/B + USB20 to Dual SATA Host Adapter Description The JMB356 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device. The highly integrated USB 2.0, 1394A/B and SATA Phys technology provides a cost-effective solution to apply SATA to SATA device or USB to SATA device or 1394 to SATA device enclosure. The USB adheres to the Mass Storage Class Bulk-Only Transport Specification. The embedded command parser supports both ATA and ATAPI command set with LBA48 bit addressing capability. The 1394 adheres to SBP-2 specification. And SBP-2 acceleration hardware is embedded to off-load CPU and easy firmware control. Features Compliance with Gen1i/Gen1m of Serial ATA II Electrical Specification 2.