JMF661 - SATA III to Flash controller

JMicron

General Description

Version B.1.0 © JMicron 2012.

Key Features

Compliance Compliant with Serial ATA International Organization: Serial ATA Revision 2.6.

📥 Download Datasheet

JMF661 sata iii to flash controller by JMicron - Datasheet Preview

Datasheet Details

Part number	JMF661
Manufacturer	JMicron
File Size	129.05 KB
Description	SATA III to Flash controller
Datasheet	JMF661 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer

Other Datasheets by JMicron

Part Number	Description
JMF662	SATA III to Flash controller
JMF601	SATA II to Flash Controller
JMF602	SATA II to Flash Controller
JMF605	ARM Base SATAII to Flash Controller
JMF612	SATA II to Flash Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

JMF662 JMF661 SATA III to Flash controller Overview JMF661 is a single chip, supports external SDRAM, SATA III to NAND flash interface. It is native design to provide higher bandwidth for flash memory access. JMF661 can support the maximum read and write speed to drive the limit of flash memory. JMF661 has the best supporting to the latest NAND flash memory, including Toshiba 32nm/24nm HBL/ABL Flash. It also provides the embedded hardware error correction code (ECC), wear leveling, and bad block management technology in this chip. In order to resolve compatibility issue, JMF661 provides the on line firmware upgrade ability. JMF661 provides embedded processor, internal masked ROM, data SRAM, SATA link/transport layer, SATA PHY.