SC-9100 Datasheet | Johnson Controls

Features and Benefits ! Ready-to-use connection diagrams ! Great number of application programs available from a single controller No extra engineering required The most adapted solution for your application is ready to use. Provides easy reading of the control information Simplifies the installation Possibility to integrate the SC 9100 into a Johnson Controls supervisory system Accuracy of digital clock and easy reading through LCD display ! Clear alpha-numeric backlighted display ! Removable connectors, DIN rail mounting or screw mounting ! munication bus ! Real time clock option using SC-9180 room mand module © 1999 Johnson Controls, Inc. Order No. PD-SC9100-E B18 http://.. O rdering data SC-9100- 8 Version number Country Code e.g. 001 For USA 033 For France 852 For Hong Kong Sensors and Actuators The sensors and actuators, which are to be used in connection with the SC-9100, are defined in the “Application Note” bulletins. Sensor Series: - TS -91 - RS -91 Valves and Actuators: Accessories: SC-9100-MK: Panel mount kit - VB - VG - VA - RA - M- 91 and M-92 Auxiliary devices: - Frost protection 270XT - Room mand module SC-9180 Application Overview Hardware: 4 analog inputs (2 x 0/10 V or NTC, 2 x NTC) 2 digital inputs (potential free contacts) 3 analog outputs (0/10 V) 2 triacs outputs (24 VAC, 0,5 A) 1 relay output (24 VAC, 2 A) Installation Tools required: screwdriver, insulation stripping tool. Wiring: Before connecting or disconnecting any wires, ensure that all power supplies have been switched off to prevent equipment damage and avoid electrical shock. Separate extra low voltage (safe) wiring from power line voltage wiring. The 24 V supply must be stable and not shared with other switched inductive loads. Software: SC-9100 contains PI modules, ON/OFF, calculations (e.g. set point reset by outside tempera-ture), logic controls (e.g. frost protection, clock) Applications: The SC-9100 applications are divided into...