R75IF Datasheet | KEMET

Overview The R75 Series is constructed of metallized polypropylene film with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing solvent resistant plastic case with thermosetting resin material meeting the UL 94 V- 0 requirements. Two different winding constructions are used depending on voltage parameters and lead spacing. Please see the Performance Characteristics for more information. Automotive grade devices (up to lead spacing 22.5 mm) meet the demanding Automotive Electronics Council's AEC- Q200 qualification requirements. Applications Typical applications include resonant circuit, high frequency medium to heigh current, silicon-controlled rectifier (SCR and IGBT) and Si C (e.g. MOSFET) mutation circuits as well as applications with high voltage and medium to high current and DC link. Not suitable for across-the-line application (see Suppressor Capacitors). Benefits - Voltage range: 160 - 2,000 VDC - Capacitance range: 220 p F - 33 µF - Lead Spacing: 7.5 - 37.5 mm - Capacitance tolerance: ±5%, ±10%, ±20% - Climatic category: 55/105/56 IEC 60068- 1 - Operating temperature range of - 55˚C to +105˚C - Ro HS pliance and lead-free terminations - Tape & Reel packaging in accordance with IEC 60286- 2 - Self-healing - Automotive (AEC- Q200) grades available up to lead spacing 22.5 mm Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System R75 Series Metallized Polypropylene Rated Voltage (VDC) Lead Spacing (mm) Capacitance Code (p F) G = 160 I = 250 M = 400 P = 630 Q = 1,000 R = 1,250 T = 1,600 U = 2,000 D = 7.5 F = 10 I = 15 N = 22.5 R = 27.5 W = 37.5 The last three digits represent significant figures. The first digit specifies the total number of zeros to be added. Packaging See Ordering Options Table Internal...