Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial,
DC and Pulse Applications (Automotive Grade)
Overview
The R75 Series is constructed of metallized polypropylene
film with radial leads of tinned wire. The radial leads
are electrically welded to the metal layer on the ends of
the capacitor winding. The capacitor is encapsulated in
a self-extinguishing solvent resistant plastic case with
thermosetting resin material meeting the UL 94 V–0
requirements. Two different winding constructions are used
depending on voltage parameters and lead spacing. Please
see the Performance Characteristics for more information.
Automotive grade devices (up to lead spacing 22.5 mm)
meet the demanding Automotive Electronics Council's
AEC–Q200 qualification requirements.
Applications
Typical applications include resonant circuit, high frequency
medium to heigh current, silicon-controlled rectifier (SCR
and IGBT) and SiC (e.g. MOSFET) commutation circuits as
well as applications with high voltage and medium to high
current and DC link.
Not suitable for across-the-line application
(see Suppressor Capacitors).
Benefits
• Voltage range: 160 – 2,000 VDC
• Capacitance range: 220 pF – 33 µF
• Lead Spacing: 7.5 – 37.5 mm
• Capacitance tolerance: ±5%, ±10%, ±20%
• Climatic category: 55/105/56 IEC 60068–1
• Operating temperature range of −55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Tape & Reel packaging in accordance with IEC 60286–2
• Self-healing
• Automotive (AEC–Q200) grades available up to lead
spacing 22.5 mm
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
R75
Series
Metallized
Polypropylene
P
N
2820
Rated Voltage (VDC) Lead Spacing (mm)
Capacitance Code
(pF)
G = 160
I = 250
M = 400
P = 630
Q = 1,000
R = 1,250
T = 1,600
U = 2,000
D = 7.5
F = 10
I = 15
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
significant figures.
The first digit
specifies the total
number of zeros
to be added.
AA
Packaging
See Ordering
Options Table
30
Internal Use
00
50
10
60
20
70
30
80
40
L0
K
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Built Into Tomorrow
F3106_R75 • 3/26/2021
1
