Tantalum Through-Hole Capacitors – Hermetically Sealed

T110 Axial MIL–PRF–39003 Polar Type and

T212 (CSR13 Style)

Overview

The KEMET standard hermetically sealed T110 Series is

targeted for use in high humidity environments. These

capacitors are ruggedly built, designed for miniaturized

circuitry, and are especially well-suited for coupling, bypass,

filtering and RC timing circuits. The T110 Series exhibits

excellent stability as well as extremely low DC leakage

current, dissipation factor, and ESR/impedance over a wide

temperature and frequency range. Available in standard

EIA capacitance values from 0.0047 µF to 330 µF in ±20%,

±10%, and ±5% tolerances, the T110 Series is now offered in

working voltages of 6 VDC to 125 VDC and low ESR limits.

Higher CV values in comparable case sizes are available in

the KEMET T410 Series.

Benefits

• Taped and reeled per EIA Specification RS–296

• Marking per MIL–STD–1285

• Qualified to MIL–PRF–39003 (CSR13 Style)

• Failure rate options: Graded – B, C, D, and G

Exponential – M, P, R, and S*

• Capacitance values of 0.0047 μF to 330 μF

• Tolerances of ±5%, ±10% and ±20%

• Voltage rating of 6 – 125 VDC

• Operating temperature range of −55°C to +125°C

• Case sizes: A, B, C, D

*Failure rates apply to military products only

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Applications

Typical applications include coupling, bypass, filtering and RC timing circuits in miniaturized circuitry.

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

T2031_T110_AXIAL_T212 • 2/24/2020

1