900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






KEMET

T591 Datasheet Preview

T591 Datasheet

Organic Capacitor

No Preview Available !

KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591, T598, T597, and T599 High Humidity and High
Temperature Automotive Grade Polymer Electrolytic,
2.5 – 50 VDC
Overview
The KEMET Organic Capacitor (KO-CAP) is a solid
electrolytic capacitor with a conductive polymer cathode,
capable of delivering very low ESR and an improved
capacitance retention at high frequencies. KO-CAP
combines the low ESR of the multilayer ceramic, the high
capacitance of aluminum electrolytic and the volumetric
efficiency of tantalum into a single surface mount
package. Unlike liquid electrolyte-based capacitors,
KO-CAP has a very long operational life and a high ripple
current capabilities.
The T591/T597/T598/T599 High Humidity and High
Temperature Polymer Electrolytic capacitors deliver higher
capacitance and ESR stability under harsh environmental
conditions. Enhancements to the design and selected
material upgrades were introduced to deliver 500 hours
(T591) or 1,000 hours (T598, T599) at 85°C/85% RH rated
voltage and to fully comply with the AEC-Q200 qualification
testing with maximum operational temperature life up
to 125ºC and 150ºC respectively. These capacitors are
manufactured in an ISO TS 16949 certified plants and are
subjected to PPAP/PSW, as well as change control.
Benefits
Applications
• Ultra low ESR
Full compliance with AEC-Q200 qualification test plan
(T597 FD 125°C, T598 125°C, T599 150°C)
Qualification plan based on AEC–Q200 with 85°C/85%RH
load specification limited to 500 hours (T591)
Extended endurance test qualification for T598/T599
(VR < 16 V) , up to 2,000 hours 125°C
• Dedicated H termination and Surge current testing options
(T598) for Defense and Aerospace Segment
TS 16949 certified plants
Subject to PPAP/PSW and change control
• Meets or exceeds EIA standard 535BAAC
• Tape & Reel standard packaging per EIA 481
Halogen-free epoxy and RoHS compliant
Typical applications include decoupling and filtering in
a variety of market segments, with special emphasis in
automotive applications such as infotainment, ADAS, chassis
and safety, as well as powertrain, where harsh conditions,
such as high humidity and temperature, are a concern.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
T2073_T59X • 7/10/2020 1




KEMET

T591 Datasheet Preview

T591 Datasheet

Organic Capacitor

No Preview Available !

KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
Standard Construction
T
59X
Capacitor
Class
Series
T = Tantalum
591 = 500 Hours
load humidity
598 = AEC-Q200
qualified (125°C)
599 = AEC-Q200
qualified (150°C)
D
107
M
010
A
T
E025
Case Capacitance Capacitance Rated Voltage Failure Rate/ Termination
Size Code (pF) Tolerance
(VDC)
Design
Finish
ESR
Packaging
(C-Spec)
B
First two M = ±20%
D
digits
K = ±10%
V
represent
X significant
figures. Third
digit specifies
number of
zeros.
2R5 = 2.5
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
A = N/A
T = 100%
Tin (Sn)
Maximum
ESR in
mΩ,
025 = 25
Blank = 7" Reel
7280 = 13" Reel
Face Down Construction
T
597
S
476
M
006
A
P
E200
Capacitor
Class
Series
Case Capacitance Capacitance Rated Voltage Failure Rate/ Termination
Size Code (pF) Tolerance (VDC)
Design
Finish
ESR
Packaging
(C-Spec)
T = Tantalum 597 = AEC-Q200 P
First two M = ±20% 2R5 = 2.5
qualified (125°C) S
digits
006 = 6.3
face down
represent
010 = 10
construction
significant
figures. Third
digit specifies
number of
zeros.
A = N/A
P = Ni-Pd-Au
Maximum
ESR in
mΩ,
200 = 200
Blank = 7" Reel
Up-Screen with H Termination and Surge Option
T
598
D
107
M
010
Capacitor
Class
Series
Case Capacitance Capacitance
Size Code (pF) Tolerance
Rated
Voltage
(VDC)
T=
598 = AEC-Q200 B
Tantalum qualified (125°C) D
V
X
First two
digits
represent
significant
figures.
Third digit
specifies
number of
zeros.
M = ±20%
K = ±10%
2R5 = 2.5
004 = 4
006 = 6.3
010 = 10
016 = 16
025 = 25
035 = 35
050 = 50
A
H
Failure
Rate/
Design
Termination
Finish
A=
H=
N/A Standard
solder
coated
(SnPb
5% Pb
minimum)
E
Surge
E=
None
S = 10
cycles
25°C
040
ESR
Packaging
(C-Spec)
Maximum
ESR in mΩ,
040 =
40 mΩ
Blank = 7" Reel
7280 = 13" Reel
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2073_T59X • 7/10/2020 2


Part Number T591
Description Organic Capacitor
Maker KEMET
PDF Download

T591 Datasheet PDF






Similar Datasheet

1 T590N Phase Control Thyristor
Infineon
2 T591 Organic Capacitor
KEMET
3 T597 Organic Capacitor
KEMET
4 T598 Organic Capacitor
KEMET
5 T599 Organic Capacitor
KEMET
6 T599X336M035ATE065 Capacitor
KEMET





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy