900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






KEMET

USEQMSM1011600 Datasheet Preview

USEQMSM1011600 Datasheet

Motion Sensor

No Preview Available !

Motion Sensors
QMS Pyroelectric Infrared Motion Sensors, I2C-SMD
Overview
Applications
KEMET’s QMS thin film digital pyroelectric IR sensors
combine high sensitivity with fast response times to ensure
rapid and accurate motion detection, and high dynamic
range to allow motion detection nearby or over larger
distances. The 2x2 pixel version of this device allows users
to determine direction of motion.
These high quality sensors, in their small SMD package,
integrate a digital, current mode read-out. Industry standard
I2C communication enables plug-and-play connectivity to
microcontrollers and allows easy tuning. Programmable
gain and filtering offer maximum flexibility in system
design, and various low power modes, including a wake-up
by motion feature, are also available. These sensors can be
connected toegther in linear series to allow synchronized
sampling across devices.
• Contactless switching
• Office automation equipment
• Home applicances
• Lighting
• Display products
• Air-conditioners
• TV
• PC monitors
• Rice cookers
• Smart toilets
Benefits
• High sensitivity with fast response time
• High dynamic range
• Small SMD package
• I2C communication
• Digital output
• Programmable gain and filltering
• Various pixel and aperture configurations
• Ultra-low power comsumption and standby modes,
motion triggered wake-up
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
SE0212_QMS • 2/6/2020
1




KEMET

USEQMSM1011600 Datasheet Preview

USEQMSM1011600 Datasheet

Motion Sensor

No Preview Available !

Motion Sensors – QMS Pyroelectric Infrared Motion Sensors, I2C-SMD
Ordering Information
USE
Product
Family
Sensors
QMS
Series
QMS =
SMD IR
Motion
Sensors
E
Sensor Type
E = Serial output
M = Serial module
K = Evaluation kit
A
0116
Mounting Type
Specification
A = Sensor only
1 = Module type 1
or kit type 1
L = Lens
S = Small lens
0116 = 1x1 pixel, 1.65 aperture, 5.0 µm Long Pass
2216 = 2x2 pixel, 1.65 aperture, 5.0 µm Long Pass
2209 = 2x2 pixel, 0.9 aperture, 5.0 µm Long Pass
8
0
Packaging Version
0 = Bulk
0
8 = 7" Tape & Reel
Environmental Compliance
All KEMET Motion Sensors are RoHS and REACH Compliant.
Article 33(1) of the REACH Regulation states that manufacturers and importers of articles (products) are required to notify
their customers of the presence of any Substances of Very High Concern (SVHC) in their products exceeding 0.1% by weight
and provide instructions on safe use of the product.
KEMET Corporation reports regarding the Article 33(1) of REACH Regulation as follows:
1. Applicable Product: Motion Sensors (QMS series)
2. Report for the content of REACH SVHC list:
The product(s) above contains a substance by more than 0.1wt% per product weight that was published in the 8th update of
the REACH SVHC substances (December 19, 2012).
3. Regarding the safety of the motion sensors (Piezoceramic products):
The Piezoceramic that is used in this product becomes ceramic by sintering powder containing PZT as the main ingredient. It
is chemically stable, with minimum risks toward the human body or environment within the intended use of the product. Please
note that risks could occur in the case of inhalation or accidental oral uptake of powder ceramics.
4. Technical product information on the motion sensors (Piezoceramic products):
The manufacturing technique of the “piezoceramic products” whose main ingredient is Lead Titanium Zirconium Oxide (PZT)
has been established, and there is no alternative material that can exhibit superior performance than PZT at this moment.
Please note that the piezoceramic is listed as an exempt on RoHS (2011/65/EU) AnnexIII (7c.1).
5. The responsibility of piezoceramic manufacturers:
Piezoceramic manufacturers report information regarding PZT containment in their products to the customers to obey the
article 33 of the REACH regulation
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0212_QMS • 2/6/2020
2



Part Number USEQMSM1011600
Description Motion Sensor
Maker KEMET
Total Page 3 Pages
PDF Download

USEQMSM1011600 Datasheet PDF





Similar Datasheet

1 USEQMSM1011600 Motion Sensor
KEMET





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy