AP2012CGCK Datasheet | KINGBRIGHT

AP2012CGCK 2.0 x 1.25 mm SMD Chip LED Lamp DESCRIPTIONS The Green source color devices are made with Al Ga In P on Ga As substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is remended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded Features 2.0 mm x 1.25 mm SMD LED, 1.1 mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Ro HS pliant APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS REMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number AP2012CGCK Emitting Color (Material) - Green (Al Ga In P) Lens Type Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. © 2019 Kingbright. All Rights Reserved. Spec No: DSAA6049 / 1203000095 Rev No: V.19B Date: 03/25/2019 Iv (mcd) @ 20m A [2] Min. Typ. 20 50 Viewing Angle [1] 2θ1/2 140° Page 1 / 4 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting...