Datasheet4U Logo Datasheet4U.com

AT24C02N - EEPROM

Datasheet Summary

Description

The 24C02 supports a bidirectional,2-wire bus and data transmission protocol.

A device that sends data onto the bus is defined as transmitter, while a device receiving data is defined as a receiver.

Features

  • s.
  • Single supply with operation down to 1.8v.
  • Low-power CMOS technology: 1 mA active current, typical 1 μA standby current, typical(l-temp).
  • Organized as 1 block of 256 bytes (1×256×8).
  • 2-wire serial interface bus, l2CTM compatible.
  • 400 kHz (24C02) compatibility.
  • Self-timed write cycle (including auto-erase).
  • Page write buffer for up to 8 bytes.
  • Can be operated as a serial ROM.
  • ESD protection>4,000V.
  • 1,000,000 erase/write cycles.
  • Data retent.

📥 Download Datasheet

Datasheet preview – AT24C02N

Datasheet Details

Part number AT24C02N
Manufacturer Kexin
File Size 1.20 MB
Description EEPROM
Datasheet download datasheet AT24C02N Datasheet
Additional preview pages of the AT24C02N datasheet.

📁 Similar Datasheet

  • AT24C02 - 2-Wire Automotive Serial EEPROM (ATMEL Corporation)
  • AT24C02A - 2-Wire Serial EEPROM (ATMEL Corporation)
  • AT24C02B - 2-Wire Automotive Temperature Serial EEPROM (ATMEL Corporation)
  • AT24C02C - EEPROM (ATMEL)
  • AT24C02C - I2C-Compatible (Two-Wire) Serial EEPROM (Microchip)
  • AT24C02D - I2C-Compatible (2-wire) Serial EEPROM (ATMEL)
  • AT24C02D - Serial EEPROM (Microchip)
  • AT24C01 - 2-Wire Serial EEPROM (ATMEL Corporation)
  • AT24C01A - 2-Wire Automotive Serial EEPROM (ATMEL Corporation)
  • AT24C01B - 2-Wire Automotive Temperature Serial EEPROM (ATMEL Corporation)
Other Datasheets by Kexin

    Full PDF Text Transcription

    Click to expand full text
    SMD Type IC 2KI2CTMSerial EEPROM AT24C02N ■ Features ● Single supply with operation down to 1.8v ● Low-power CMOS technology: 1 mA active current, typical 1 μA standby current, typical(l-temp) ● Organized as 1 block of 256 bytes (1×256×8) ● 2-wire serial interface bus, l2CTM compatible ● 400 kHz (24C02) compatibility ● Self-timed write cycle (including auto-erase) ● Page write buffer for up to 8 bytes ● Can be operated as a serial ROM ● ESD protection>4,000V ● 1,000,000 erase/write cycles ● Data retention>200 years SOP-8 1.50 0.15 +0.04 0.21 -0.02 Pin Configuration A0 1 A1 2 A2 3 GND 4 8 VCC 7 WP 6 SCL 5 SDA ■ Device Selection Tble Part VCC Max. Clock Number Range Frequency AT24C02N 1.8-5.5 400 kHz Note 1: 100 KHz for Vcc<1.8v ■ Block Diagram www.kexin.com.
    Published: |